ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: legionnair on October 04, 2005, 09:09:56 PM

Title: new lockrite locker
Post by: legionnair on October 04, 2005, 09:09:56 PM

hey guys I just got a new locker and am just about to install it
I know how to set up my tooth pattern I would just like a run down on any addition things I might need before I start
Ie new bearings, seals, etc..
I purchase syn gear oil 75w 90

thanks for the info
dustin

Title: Re: new lockrite locker
Post by: bashzuk on October 04, 2005, 09:54:49 PM

do a search for locker install there should be some instructions on a post I made asking the same question.

New rear seals should be all you need for seals that and some rtv gasket maker.
What is it going into??

Title: Re: new lockrite locker
Post by: legionnair on October 04, 2005, 10:34:26 PM

its going into my 90 kick
with calmini exhaust 3'' suspension lift, 3'' body lift
custom winch front bumper
and custom swingaway rear bumper

Title: Re: new lockrite locker
Post by: bashzuk on October 04, 2005, 11:30:47 PM

just make sure you get the back lash correct that is my only advice.

Title: Re: new lockrite locker
Post by: legionnair on October 04, 2005, 11:35:49 PM

no problem I have rebuilt 2 speed rear axles before
the baslash is the easy part its getting the proper tooth pattern that can be a bitch sometimes