ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: berny on October 17, 2005, 05:24:32 AM
-
I FINISH To HIM PUTTING A MOTOR 125 OF FIAT To MY SAMURAI, COMMENTARY WITH RESPECT TO THIS MOTOR?
-
Now that's what I call a babelfish translation...
I've only heard of this engine going into a Lada Niva...
I don't think many americans will have much experience on fiat engines. You might try a european board ;).
-
Fiat engines are more trouble than Suzuki.
At least the ones I worked on, a 1.6L Lancia
Twin over head cams, 2 valves per cylinder :P
all the good hardware was there, and they didn't
go for teh 16V head
Berny, I would keep the Suzuki engine, if you have it
Wild
-
Hi Welcome to the board...
I agree with Wild...used to spend a lot of time working on Fiats 850's/124's/Brava's...I would not go with the engine for this application....go for the 1600 Suzuki, easier swap, less modification and alot more aftermarket support.
Good luck
Zag