ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: brawnyrebel on October 26, 2005, 05:02:24 AM

Title: samurai gas tank help
Post by: brawnyrebel on October 26, 2005, 05:02:24 AM

  Im trying to remove the fuel line from the gas tank of my samurai. Does any one know the tool or wrench size to hold the small side of the fitting. i know the big side is 17mm but i can't get anything on the small side. Any help will be appreciated.

Title: Re: samurai gas tank help
Post by: mudfkr on October 26, 2005, 01:31:54 PM

Looking at my tanks they don't have a nut shaped fitting on the small side it just round.

Pics are always better way to describe ...

(http://www.omghi2.us/april05/tankfitting.jpg)

HTH.

Title: Re: samurai gas tank help
Post by: cnj on October 26, 2005, 05:41:40 PM

Your Sammi must be a fuelie. The tank side is 15mm.

Title: Re: samurai gas tank help
Post by: brawnyrebel on October 26, 2005, 09:21:23 PM

  Nope its carbed. It must be round like the one in the picture.  Thats going to be hard to hold while i unscrew the line. Thanks for the pic

Title: Re: samurai gas tank help
Post by: mrfuelish on October 26, 2005, 11:04:46 PM

just cut the line in two about five inches or so from the tank and flair the ends a little and put some fuel line and a couple of clamps on it, if you twist that line going into the tank you will have a fun time trying to fix it.

Title: Re: samurai gas tank help
Post by: mudfkr on October 27, 2005, 01:31:36 AM

Quote from: brawnyrebel on October 26, 2005, 09:21:23 PM

Thanks for the pic

Your welcome  ;)