ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: brawnyrebel on October 27, 2005, 04:12:56 AM

Title: High beam indicator
Post by: brawnyrebel on October 27, 2005, 04:12:56 AM

  After I swapped the dash and engine out of my parts sammy , My high beam indicator stays on even if i unplug the headlight/turnsignal switch and the ignition switch. The high beams will also not come on when i push the switch forwards. Im going to break out the fluke meter when i get home, but was wondering if anyone had any suggestions on where to start looking.

Title: Re: High beam indicator
Post by: brawnyrebel on October 27, 2005, 04:45:59 PM

 Disregard. I got the brights to work and pulled the indicator bulb

Title: Re: High beam indicator
Post by: smitty808 on October 27, 2005, 10:16:59 PM

mine stays on all the timne after being in the water up to the dash a thousand times!
I tell everyone it's my "check body" light!!

Title: Re: High beam indicator
Post by: brawnyrebel on October 28, 2005, 06:24:50 PM

Even with the key off?