ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Festiva on October 27, 2005, 10:24:44 AM
-
Hi guys, i pulled a code 15 on my tracker, went to pepboys $35.00 later, after i put the sensor in im driving along light comes on code 15 again...
Anyone have any idea what the heck could be going on here? did i get the right sensor?
its a 94 8valve and the sensor that they gave me is the lower on the intake with a 2 prong connector.
thanks for your help!
Jason
-
Code 15 = Water temperature Sensor High Temperature.
You will get this if the sensor is shorted to ground. You may have a wiring problem.
(http://www.btinternet.com/~j_holland/images/tmp_sens.jpg)
-
check the resistance of both wires in the circuit from the sensor to the ecm to determine if it has ashort in the wiring
derek
-
Rhinoman, thanks for the picture!, the WTS is the part i changed, i guess i will have to check the wiring!, Does anyone know what the reading should be on this sensor to test it? mine old one might still be good.
thanks!
-
I have a table that shows the temps and
readings, this sensor varies by temp
I'll have to look for it
-
Here is a chart I generated of the resistance characteristics. You'll need to save it somewhere and then open it to get full size.
(http://www.btinternet.com/~j_holland/images/RvT.gif)