ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: manny on March 15, 2005, 10:18:36 AM
-
Im new to all the zuki scene, is it possible to cut the top off mine and install a frame from a conv., who has one, sell em?
-
Welcome to Zukiworld! Which Zuk do you have?
-
Welcome aboard manny
To cut the top off, :o
Probley cheaper and easier to get a Convertable.
I haven't heard of any body selling a top but maybe a wrecking yard could sell ya the top half?
Anything is possible ;D
-
I think going with a different truck would be better.
That is unless your making a trail rig only. Then you could cut the top off and put a roll bar in it.
-
Bodys go pretty cheap,,,,,,WAY easier to swap bodys than chop and fab.
-
I would have to second that one. Much easier to swap.
-
Plus I hate seeing tin tops hacked up. Not saying your going to hack it up ;) I just want one to chop 8) My buddy moved the upper half of the rear of his up to the door like a pickup and sealed off the back with a sub frame and sheet. Pretty sweet job to, all solid. I have pics but cant figure out how to post on this site ::)
-
Plus I hate seeing tin tops hacked up. Not saying your going to hack it up ;) I just want one to chop 8) My buddy moved the upper half of the rear of his up to the door like a pickup and sealed off the back with a sub frame and sheet. Pretty sweet job to, all solid. I have pics but cant figure out how to post on this site ::)
talking about this?
(http://www.cs.umass.edu/~glenn/bobtail.jpg)
http://www.cs.umass.edu/~glenn/personal.html
stu
-
No. My boys got a sammy and only moved the top (a bit higher than a soft top rear) forward, about to where the targa bar would be. Its is OD green though. ;D