ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: truckasaurus44 on November 25, 2005, 03:31:35 PM

Title: Sammy Diff torque specs
Post by: truckasaurus44 on November 25, 2005, 03:31:35 PM
Good news: I got a mini spool! Woo Hoo!

Bad news: I can't find the torque specs for the ring gear, carrier, or the bearing retainers(the 4 bolts that need to be pulled to get the diff and gear out).

I welded my gears like 2 years ago so I know about marking the backlash adjustment.  I just don't have the torque numbers I used back then.  Anyone know them off hand???
Title: Re: Sammy Diff torque specs
Post by: mudfkr on November 26, 2005, 01:53:41 AM
Side bearing cap bolt 51-72 lb-ft
Ring gear bolt 58-65 lb-ft
Differential case bolt 27-32.5 lb-ft

HTH.