ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: T_Madd on December 01, 2005, 01:09:24 PM
-
This may be a very newbie question but I don't know much about tracker/kicks. I am getting ready to send my tracker case to OTT for a kicker3 but I cant seem to get the two cases apart.
I have removed all the bolts around what I believe is the t-case adapter flange. It is the seam that goes between the t-case mount and the rear trans mount.
I put both cases in "N" and tried to spead apart by using a rubber hammer and hitting the ears that stick out of the case and by tring to spread the case open with a gasket scraper. I would love to post pics., but don't have a camara handy.
So, I was wondering if anyone could give me info on splitting the two cases apart and possably some pics.
Oh, and go ahead and call me a f#*kin newbie!!
Thanks for your time, Tim Madden
-
There's one bolt hidden under the tranny shifter case. Not uncommon to miss that one since it's hard to get at/see
-
Thanks SnowFalls, That was my problem. I took that bolt out and it came right apart.
-
That was the same thing for me when i had to make my shifter loner.
Hard to find. ;D
-
Thanks SnowFalls, That was my problem. I took that bolt out and it came right apart.
your welcome ...
-
you newbie... everyone knows about that bolt...
(j/k)
-
you newbie... everyone knows about that bolt...
(j/k)
Now I do too. ;D