ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 94track on December 04, 2005, 11:53:38 AM

Title: rear brake line
Post by: 94track on December 04, 2005, 11:53:38 AM

Well I "got" a hole in my rear brake line today, about 1 ft. forward from the fuel filter.  They are pretty well rusted/rotted.  Tomorrow am I will be replacing the line from the master to the rear proportioning valve, and I would like to get the parts tonight, so my question is, are these lines standard or metric ends.  I am assuming they are a standard flare, but not sure about the thread.  Any help would be appreciated

Title: Re: rear brake line
Post by: 94track on December 04, 2005, 12:39:16 PM

BTW its an 88.5 sammi

Title: Re: rear brake line
Post by: derekj on December 04, 2005, 04:10:15 PM

cut the line just before the prop valve and take the end into the parts store to match it up

derek

Title: Re: rear brake line
Post by: 94track on December 04, 2005, 05:32:21 PM

this is my only vehicle for tomorrow, and I would like to get the parts before I rip it apart

Title: Re: rear brake line
Post by: Uncivilized on December 05, 2005, 09:55:35 AM

I bought pre-made lines from Canadian Tire(Canadian auto parts chain) They were straight, with ends and flared, I just needed to bend them to shape. I asked at the parts desk whick ones were for my rig, and the showed me which ones. They were color coded.

Title: Re: rear brake line
Post by: 94track on December 05, 2005, 10:01:52 AM

just got done, they were standard thread and flare