ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Festiva on December 13, 2005, 07:47:27 AM

Title: *$%$ing Blower switch! argh, whats the deal with this and how to they come out?
Post by: Festiva on December 13, 2005, 07:47:27 AM

Hi guys, been having problems with my heater blower switch on my 94' Track, I had to clean it and rig it up with a pen spring to get by for a while,..

Whats the "offical" way to get these out? what a pita! i had to get my fingers all cut up and pull and yank to manuver the heater controls to pop the cover of the switch off and have the spring fly out,. etc etc..


thanks for your help!

Title: Re: *$%$ing Blower switch! argh, whats the deal with this and how to they come o
Post by: wildgoody on December 13, 2005, 09:18:42 AM

Mine was soldered to the wiring harness,
but the problem with my lower speeds was
that the solder came loose, so I resoldered
it with Silver Solder, 2% and it's been fine
since, I don't know if that's what fixed it, but
I would get the highest melting point solder
available, as it seems to be melting off the
contacts

Wild

Title: Re: *$%$ing Blower switch! argh, whats the deal with this and how to they come out?
Post by: Festiva on December 13, 2005, 09:20:32 AM

wierd, mine was plugged, and all contacts were solid metal right to the tabs that plug in.

Title: Re: *$%$ing Blower switch! argh, whats the deal with this and how to they come o
Post by: wildgoody on December 13, 2005, 09:22:01 AM

They must have changed it after
too many warantee claims