ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: troyshere on December 18, 2005, 08:42:53 PM

Title: web wiper brace
Post by: troyshere on December 18, 2005, 08:42:53 PM

I looked this morning and Amy's black sammy had the dreaded crack starting on her windshield frame.


(http://photos.zuwharrie.com/users/troyshere/wiper_crack.jpg)




I thought about a cheap and easy fix, but hell I'm a fab guy so I fabbed something.

(http://photos.zuwharrie.com/users/troyshere/web_wiper_1.jpg)

(http://photos.zuwharrie.com/users/troyshere/web_wiper_2.jpg)

1/8 " plate plasma cut with stainless hardware.  I would have powdercoated them but I only do black.

Yep I know the date is way wrong on this camera.

Title: Re: web wiper brace
Post by: wildgoody on December 18, 2005, 11:08:18 PM

That is a marketable fix, get busy man  ;D

Title: Re: web wiper brace
Post by: troyshere on December 19, 2005, 08:05:47 AM

Quote from: wildgoody on December 18, 2005, 11:08:18 PM

That is a marketable fix, get busy man  ;D

Watch for them on e-bay.  My wife will be selling them before I can get them built.

Need to write up some mounting instructions and figure out how much to start them at.

Title: Re: web wiper brace
Post by: wildgoody on December 19, 2005, 10:25:39 AM

You could have one style that is just utility look,
half moon, cost less, and the web style in 2 or
3 colors and cost a little more.

I would say about $25 to $30 for these, depending on
the time involved to cut and finish, figure your time at
about $30-40 an hour to be fair to yourself.

Good Luck
Wild