ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Model Specific Suzuki Forum => Suzuki Grand Vitara, Vitara, Chevy Tracker (Gen. 2 Platform) 1999-2005 => Topic started by: CE1_2NR on December 24, 2005, 11:36:57 AM
-
>:( I cannot believe no company makes a set of headers for the 2.5L V6.
JDMCRX and I are looking into building some.
His GV with the intake and exhaust really pulls hard. Some headers and a chip of some kind would probably increase by 15-20hp.
-
They're such a small niche market no one's going to spend the development money on it. That's the downside of driving a vehicle like this.
-
Headers are in the works. Collectors are here now ill post pics next month
-
interested, very interested if it will bolt strait up and still use my stock O2 sensor location. what are you thinking in the way of price, any guesses?
-
Well it will not be a straight swap. Due to the fact im going long tubes 30-36" primaries. It will exit on the lower side of the engine, Probly beside the bell housing and will go to 2 2.5" cats on each side. i will move the secondary 02 sensors down stream. Then there will be a Y pipe and a flex joint. I want to try to keep it as short as possible so i can use a Flex joint and a resonator.