ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: MARTYRD on December 29, 2005, 07:41:40 AM

Title: I NEED A NEW WINDOW MOTOR FOR X-90 . ANY OPTIONS ?
Post by: MARTYRD on December 29, 2005, 07:41:40 AM

MY 1996 X-90 DRIVER WINDOW IS REALLY SLOW GOING DOWN. ANY IDEAS HOW TO FIX ? WILL ANY OTHER WINDOW MOTOR WORK ? I GUESS IT IS MOTOR AND NOT A SWITCH ? WERE COULD I FIND A MOTOR IF THAT IS PROBLEM ? THANKS. MARTY

Title: Re: I NEED A NEW WINDOW MOTOR FOR X-90 . ANY OPTIONS ?
Post by: Zukipilot on December 29, 2005, 08:16:36 AM

My 98 has the same problem. Pull the door pannel off and watch the bottom of the glass when you raise the window. Mine had become loose in the bracket allowing the rear od the glass to pull up out of the bracket causing it to bind.

Next time you roll the window up, try pushing down or pulling up on the rear edge of the glass and see if it speeds up. If it does, all you need to do is clean the tracks and tighten the bracket that holds the bottom of the glass.

Zig

Title: Re: I NEED A NEW WINDOW MOTOR FOR X-90 . ANY OPTIONS ?
Post by: MARTYRD on December 31, 2005, 10:07:33 PM

thanks for the help. tried cleaning but still window is real slow window. clicking sound going up. also u might know that the rubber wndow seal at the top has rotted out. fell off. so i now i have 1/3 inch gap at top of drivers side window. i might try to glue it back. marty

Title: Re: I NEED A NEW WINDOW MOTOR FOR X-90 . ANY OPTIONS ?
Post by: Zukipilot on January 03, 2006, 07:16:27 AM

Quote from: MARTYRD on December 31, 2005, 10:07:33 PM

thanks for the help. tried cleaning but still window is real slow window. clicking sound going up. also u might know that the rubber wndow seal at the top has rotted out. fell off. so i now i have 1/3 inch gap at top of drivers side window. i might try to glue it back. marty

Try calling Hawk Strictly Suzuki at 1-888-SAMURAI. They will probably have the trim, motor, whatever you need (cheaper than factory)

Zig