Hello Guest
« previous next »
Pages: [1]   Go Down

Sky's 2" B/L

  • 5 Replies
  • 1375 Views

0 Members and 1 Guest are viewing this topic.

*

Offline ppltrak

  • 654
  • 0
  • Gender: Male
  • zukspeed staff
    • zukspeed.com
Sky's 2" B/L
« on: January 13, 2005, 02:51:03 PM »
Well I bought the lift and was looking over the writeup on the front page. I noticed that they glued the spacers at the rearward perch. My directions say to glue them between the 2 and 3 mounts. Can somebody clear this up? :-/ Personally I think that both points should be extended.


 Kevin
Logged
94 purple/green splash tracker w/ calmini 3' heavly modified lift 32 11.5 r15 bfg m/t's  & custom air induction and header w/ 2"exh. no cat lockrite rear 2" B/L and a heavy right foot and now 583s steel up front and locked.
2002 GV 2.5l 4.5 ZN lift locked on 31's
*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: Sky's 2" B/L
« Reply #1 on: January 13, 2005, 02:53:05 PM »
I tossed my rubber mid-way
body mounts, but I didn't think
they were doing much  ::)

Wild
Logged
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.
*

Offline 92Sidekick4x4

  • 1456
  • 0
  • Gender: Male
  • Spencer Atkinson, 92Sidekick4x4
Re: Sky's 2" B/L
« Reply #2 on: January 13, 2005, 04:10:18 PM »
i dunno about using glue for a body lfit but meh :-/
Logged

my lug nuts require more torque then my engine makes ;)
*

Offline whitfield

  • 633
  • 0
  • Gender: Male
  • 4-dr Kick on 34's
Re: Sky's 2" B/L
« Reply #3 on: January 13, 2005, 05:47:14 PM »
I am running an Old (hand made) Sky 2" sammy body lift on the 4dr.  I just used the bolt on blocks, other points are on their own, (View was not worth the climb).   If it causes issues than I'll build the next one different, SO far no problems.
Logged
Old Dog looking to learn some new tricks. 

*

the_dude

Re: Sky's 2" B/L
« Reply #4 on: January 16, 2005, 02:09:05 PM »
I did the Sky lift too and I am happy with it.  I agree a second set of those blocks would come in handy so you dont have to choose where to put them. I put mine in the back too like the pictures. I wasn't going to do it at all but I couldn't just throw them away. I agree with wild I dont think the mid ways do much. I mean on the stock set up there is no bolts there anyhow.

I lengthened my T-case shifter too. It's pretty easy to do as well.
Logged
*

Offline Somer

  • 143
  • 0
  • Gender: Male
  • Hey, is it suppose to do that!!
    • D2
Re: Sky's 2" B/L
« Reply #5 on: January 16, 2005, 10:40:11 PM »
I have the RRO 2" bl, and its the same way too.  I just cut up a set of 2" steel square tubeing to make an extra set of blocks.  Why can't both companys just include this in their kit  ???
I couldn't get the glue that they said to use, so I just used some kind of Epoxy to hold the blocks in place.   Its been 2yrs and they're still in place.  Even if they do fall out it I don't think that they would cause any immediate  danger.  But, if you're really worried about this I guess you could change those blocks to steel tubing and have them welded to the frame or body..
Logged
Pages: [1]   Go Up
« previous next »