Hello Guest
« previous next »
Pages: [1]   Go Down

sacle 1 to 10

  • 2 Replies
  • 1124 Views

0 Members and 1 Guest are viewing this topic.

*

Offline sidekick101

  • 128
  • 0
  • Gender: Male
  • best site on the net
sacle 1 to 10
« on: January 07, 2007, 01:12:44 PM »
will ti be benifital to adjust the valve lash. car has225,000 km on her. will it save gas or waste o time. 1 low10 get er done hahah
Logged
1993 sidekick JX, 2 dr, soft top, automatic,
*

Offline Jimiweld

  • 234
  • 0
  • Gender: Male
    • www.fullfusion.ca
Re: sacle 1 to 10
« Reply #1 on: January 07, 2007, 02:46:40 PM »
Depends how out of adjustment they are whether or not it will help. If it rattles real loud then I would adjust them right away.
It's an easy thing to do so just do it and see what's going on in there.
Logged
1990 Tracker - 3.5" body Lift, 1.5 coil spacers, 31" TRXUS tires, homemade front bumper, Automatic Tansmission, 5.12 diff gears. Rear is Locked
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: sacle 1 to 10
« Reply #2 on: January 08, 2007, 04:50:57 AM »
If they haven't been done for a while I would do them. You tend not to get a rattle on Zuk motors, the gaps close up as the seats wear. If you run with the gaps too small you can burn out an exhaust valve.
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
Pages: [1]   Go Up
« previous next »