Hello Guest

1" Tracker body lift

  • 5 Replies
  • 1458 Views

0 Members and 1 Guest are viewing this topic.

1" Tracker body lift
« on: May 15, 2007, 11:09:33 AM »
Can someone advise me how to make 1" body lift on a 4-door Tracker. All kits I see start at 2"....

*

g-man

Re: 1" Tracker body lift
« Reply #1 on: May 15, 2007, 07:52:11 PM »
Hockey pucks.

*

Offline brace

  • 264
  • 1
  • Gender: Male
  • I built it; I break it; I fix it.
Re: 1" Tracker body lift
« Reply #2 on: May 15, 2007, 10:21:59 PM »
Never heard of 1"; plenty of 2" and 3" though. 
94 Escudo, 1.6 ltr 16v, 1.5" spacer lift, 31's 

*

Offline Carnage

  • 2453
  • 0
  • Gender: Male
  • If you only knew the POWER...
Re: 1" Tracker body lift
« Reply #3 on: May 15, 2007, 10:44:03 PM »
curious

why a 1"?

*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: 1" Tracker body lift
« Reply #4 on: May 16, 2007, 11:35:26 AM »
All kits I see start at 2"....

3" is easiest to make. 2" is more difficult requiring sleeve bolts. 1" I would imagine would have to be of a similar design to the 2", take a look at the Rock Road kit. The problem is that the Track/Kick has studs welded into the body and they can't easily be changed for bolts of a longer length.
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org

*

Offline ppltrak

  • 654
  • 0
  • Gender: Male
  • zukspeed staff
    • zukspeed.com
Re: 1" Tracker body lift
« Reply #5 on: May 16, 2007, 02:31:11 PM »
Check out SKY's sami. 1inch B/L It should work on a kick. ???

      Kevin
94 purple/green splash tracker w/ calmini 3' heavly modified lift 32 11.5 r15 bfg m/t's  & custom air induction and header w/ 2"exh. no cat lockrite rear 2" B/L and a heavy right foot and now 583s steel up front and locked.
2002 GV 2.5l 4.5 ZN lift locked on 31's