Hello Guest
« previous next »
Pages: [1]   Go Down

Samurai hubs on a tracker

  • 4 Replies
  • 1227 Views

0 Members and 1 Guest are viewing this topic.

*

Offline bashzuk

  • 784
  • 1
  • Gender: Male
  • Been zuked lately!!!
    • BashZuk's web page
Samurai hubs on a tracker
« on: April 01, 2008, 12:31:50 AM »
I was wondering if Samurai Manual hubs will fit on a 96 geo Tracker.
Did a search couldn't Find anything.
Any helpful information appreciated.
Logged
Mean Green Wheeling Machine
88 Samurai 1" Shackles SPOA with 32" Tires
It's not a Jeep thing, it's not a Suzuki thing, or a Chevy,Ford thing.
It's a wheeling thing now get out and do it!
*

Offline Yankee-Tim

  • 562
  • 1
Re: Samurai hubs on a tracker
« Reply #1 on: April 01, 2008, 06:46:20 AM »
They will not fit correctly.
Logged
*

Offline bashzuk

  • 784
  • 1
  • Gender: Male
  • Been zuked lately!!!
    • BashZuk's web page
Re: Samurai hubs on a tracker
« Reply #2 on: April 01, 2008, 08:02:51 AM »
Thanks, guess I'll go buy some then ;D
Logged
Mean Green Wheeling Machine
88 Samurai 1" Shackles SPOA with 32" Tires
It's not a Jeep thing, it's not a Suzuki thing, or a Chevy,Ford thing.
It's a wheeling thing now get out and do it!
*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: Samurai hubs on a tracker
« Reply #3 on: April 01, 2008, 09:54:56 AM »
The problem is the clearance.  The Sammy hubs just aren't quite as long as the Tracker ones.  However, most people say that if you just run two sets of gaskets that is enough to fix the problem.
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

phloop

Re: Samurai hubs on a tracker
« Reply #4 on: April 01, 2008, 02:00:16 PM »
The kick has a snapring and spacer washer that holds the axle in place that there is no clearance made for in the Sami hub's. I have a set of Sami hubs that I will be adding to my 95, so I have looked into this myself.
Logged
Pages: [1]   Go Up
« previous next »