Hello Guest
« previous next »
Pages: 1 [2]   Go Down

What can be done with these?

  • 21 Replies
  • 3907 Views

0 Members and 3 Guests are viewing this topic.

*

Offline Jeremiah

  • 1880
  • 1
  • Gender: Male
  • Viva La ZUKIWORLD!
Re: What can be done with these?
« Reply #15 on: December 27, 2008, 05:52:50 PM »
I've found some information on the diffs (4.62 gears). Is this the gearing in 5-speed and auto trans? Which 5.125 gears (from Gen 1) do I need (front / rear / does it matter?)? Are the stock tires on Gen2 27" as well? If so, according to my calculations, 5.125 will correct for 30" tires perfectly - is that correct? It looks like Gen 2 is 16" rim - is that so? Are they still 5 on 5.5" bolt pattern? Sorry for all the questions, I really am trying to dig and search, but there's a real lack in specifics in some of the chatter in other threads  :'(
Logged
'96 4 door kick: 29" Pep-Boys M/T, 1.5" OME
'83 SJ410: 31" Toyo M/T, SPOA, 1.3L
'08 Yamaha FZ6
*

Offline Jeremiah

  • 1880
  • 1
  • Gender: Male
  • Viva La ZUKIWORLD!
Re: What can be done with these?
« Reply #16 on: December 27, 2008, 06:10:37 PM »
Oh, and I have an extra OME lift kit for Gen 1 - does anyone know if it'll fit?
Logged
'96 4 door kick: 29" Pep-Boys M/T, 1.5" OME
'83 SJ410: 31" Toyo M/T, SPOA, 1.3L
'08 Yamaha FZ6
*

Offline BackWoodsTracker

  • 203
  • 0
Re: What can be done with these?
« Reply #17 on: December 27, 2008, 08:36:34 PM »
My 2001 Tracker(GV) has 15" rims that are 5 on 5.5", but the Suzuki version has the 16" rims. That's from what I've seen around, not sure all years are the same.
Logged
2001 4 door Tracker. 2.5 V6 4x4
235/75/15 Firestone Destination A/T's
Jeff's 2" spacer lift
*

Offline IanL

  • 466
  • 5
  • Gender: Male
  • You know the answer - DIY :-)
Re: What can be done with these?
« Reply #18 on: December 28, 2008, 02:14:27 AM »
Suzukis have larger front brakes and need the 16" wheels to clear them.  The bolt pattern is the same.

For gear ratios see http://bbs.zuwharrie.com/content/topic,18763.0.html

If you change final drive gears, you must change front AND back.  I believe it does matter about front to front, etc.
Logged
'98 GV V6, '96 X-90 with RRO 2.5" lift and 195/80 R15, '93 Cappuccino.
*

Offline Jeremiah

  • 1880
  • 1
  • Gender: Male
  • Viva La ZUKIWORLD!
Re: What can be done with these?
« Reply #19 on: December 29, 2008, 12:00:00 AM »
Quote from: IanL on December 28, 2008, 02:14:27 AM
If you change final drive gears, you must change front AND back.  I believe it does matter about front to front, etc.

I should have been more specific... I know I'd be changing the front & rear in the Gen 2 - I'm wondering if I need the front or rear from the donor vehicle (For example, in Samurais you can only use the diff gears from the front).
Logged
'96 4 door kick: 29" Pep-Boys M/T, 1.5" OME
'83 SJ410: 31" Toyo M/T, SPOA, 1.3L
'08 Yamaha FZ6
*

Offline olija

  • 770
  • 2
  • Gender: Male
    • Check out my cardomain
Re: What can be done with these?
« Reply #20 on: December 29, 2008, 04:37:17 PM »
Quote from: IanL on December 28, 2008, 02:14:27 AM
Suzukis have larger front brakes and need the 16" wheels to clear them. 

Not true! I have put a 15x7 Jeep CJ rims on my 01 Vitara and it cleared the caliper and rotor just fine! The rims have 3.75" backspacing, just so you know. I think the style of the rim really matters in whether it will clear or not.
Logged
97 Sidekick 4door 5 speed, 1.5 spacer lift, 2" body lift, CJ rims, locked rear, 31's, 4:1 low <SOLD>
01 Vitara 2.0L 5 speed, 2.5" Calmini lift, 2" body lift, Sidekick rims, locked rear, 31's, 4:1 low, 5.13 diffs <SOLD>
03 XL7 2.7 5 speed, 4.5" AE lift with OME springs, 2" AE body lift, 5.13 diffs, 3:1 low, 235/80R17 BFG AT's on Ultra 17x8 with 1" spacers, skid plates, Balmer Fab front bumper
*

Offline IanL

  • 466
  • 5
  • Gender: Male
  • You know the answer - DIY :-)
Re: What can be done with these?
« Reply #21 on: December 31, 2008, 01:30:45 AM »
Quote from: olija on December 29, 2008, 04:37:17 PM
Quote from: IanL on December 28, 2008, 02:14:27 AM
Suzukis have larger front brakes and need the 16" wheels to clear them. 

Not true! I have put a 15x7 Jeep CJ rims on my 01 Vitara and it cleared the caliper and rotor just fine! The rims have 3.75" backspacing, just so you know. I think the style of the rim really matters in whether it will clear or not.

Ok, I should have said ".. and cannot accept the stock 15" rims."
Logged
'98 GV V6, '96 X-90 with RRO 2.5" lift and 195/80 R15, '93 Cappuccino.
Pages: 1 [2]   Go Up
« previous next »