Hello Guest
« previous next »
Pages: [1]   Go Down

94 TRACKER TORQUE CONVERTER PROBLEMS

  • 2 Replies
  • 1939 Views

0 Members and 1 Guest are viewing this topic.

*

Offline AJM94TRACKER

  • 10
  • 0
94 TRACKER TORQUE CONVERTER PROBLEMS
« on: February 16, 2009, 05:28:23 AM »
1994 GEO TRACKER 1.6 8V 4X4 3-SP AUTO TRANS NO TORQUE CONVER LOCKUP.  ALREADY REPLACED THE SOLENOID VALVE FOR TQ LOCKUP, TESTED FOR 12V AT THE RELAY AT 45-50 MPH, GETTIN 12V AND TESTED THE WIRE GOING DOWN TO THE TRANSMISSION FOR CONTINUITY, CHECKS GOOD, ANYONE PLEASE HELP!!!!
Logged
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: 94 TRACKER TORQUE CONVERTER PROBLEMS
« Reply #1 on: February 16, 2009, 02:41:44 PM »
There's two parts to the Torque converter lockup, the solenoid AND the pressure switch. Testing the pressure switch requires some kind of special dealer only high zoot tool or something, so I would just swap it . I replaced both when mine went south. They are a bit pricy though. Maybe you can find one at anywhere other than a dealer.
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Offline AJM94TRACKER

  • 10
  • 0
Re: 94 TRACKER TORQUE CONVERTER PROBLEMS
« Reply #2 on: February 17, 2009, 11:15:27 AM »
IS THERE ANYONE ELSE THAT HAS HAD THIS PROBLEM???, PLEASE HELP, I AM SICK OF WORKING ON THIS THING ALREADY!!!!!
Logged
Pages: [1]   Go Up
« previous next »