Hello Guest
« previous next »
Pages: [1]   Go Down

Sending unit questions

  • 5 Replies
  • 1717 Views

0 Members and 1 Guest are viewing this topic.

*

Offline zukizuki07

  • 251
  • 0
  • Gender: Male
Sending unit questions
« on: April 30, 2009, 05:26:52 PM »
So my gas gauge hasnt worked since i got my tracker, wanting to fix this, so annoying not knowing if i will run it out or not hahaha my question is, are all the 2 door sending units the same? I have a 96 2 door, and know of a lot of older trackkicks with good sending units, but wasnt sure if they are the same. please post asap. thanks
Logged
96 2 Door Tracker
4 door springs, Calmini 3"BL , Trailtough Mini spool , 31's
Plans: Jeffs  diff spacer, bumpers, smittybuilt 8k winch and XL7 iron Diff. housing swap
*

Offline TopHeavy96

  • 488
  • 4
  • Gender: Male
Re: Sending unit questions
« Reply #1 on: April 30, 2009, 06:07:15 PM »
Hey I don't know for sure, but according to alldata they all use the same one.  Anyone confirm this?  I don't 100% trust alldata for part numbers.
Logged
96' Tracker 4-door, 16v, auto, open front, limited slip rear, Jeff1997's 2" lift with diff spacer, 95' mustang shocks, Calmini axle truss, BFG 30x9.5 mud-terrains on 15x8 "D"-windows, trimmed and banged fenders and bumpers, radio shack CB, Tom Tom GPS, 100w KC lights
http://www.facebook.com/video/video.php?v=1097549855954
*

Offline zukizuki07

  • 251
  • 0
  • Gender: Male
Re: Sending unit questions
« Reply #2 on: April 30, 2009, 07:11:44 PM »
Quote from: TopHeavy96 on April 30, 2009, 06:07:15 PM
Hey I don't know for sure, but according to alldata they all use the same one.  Anyone confirm this?  I don't 100% trust alldata for part numbers.
thanks for making an effort! haha i cant find a thing on them....screw it ill just try one out
Logged
96 2 Door Tracker
4 door springs, Calmini 3"BL , Trailtough Mini spool , 31's
Plans: Jeffs  diff spacer, bumpers, smittybuilt 8k winch and XL7 iron Diff. housing swap
*

Offline TopHeavy96

  • 488
  • 4
  • Gender: Male
Re: Sending unit questions
« Reply #3 on: April 30, 2009, 08:09:52 PM »
No problemo, happy to help!
Logged
96' Tracker 4-door, 16v, auto, open front, limited slip rear, Jeff1997's 2" lift with diff spacer, 95' mustang shocks, Calmini axle truss, BFG 30x9.5 mud-terrains on 15x8 "D"-windows, trimmed and banged fenders and bumpers, radio shack CB, Tom Tom GPS, 100w KC lights
http://www.facebook.com/video/video.php?v=1097549855954
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: Sending unit questions
« Reply #4 on: May 01, 2009, 04:25:07 AM »
Before you rush out and buy a sender unit check the wiring behind the rear light cluster and also the connection to the top of the tank.
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
*

Offline fuzzy1

  • 350
  • 7
  • Gender: Male
  • It's not about hair, it's about the logic
Re: Sending unit questions
« Reply #5 on: May 01, 2009, 08:11:08 AM »
Quote from: Rhinoman on May 01, 2009, 04:25:07 AM
Before you rush out and buy a sender unit check the wiring behind the rear light cluster and also the connection to the top of the tank.


X2, make sure its getting power, & sender is grounded right as well as the gauge. If you have bad circuits, a new one won't work any better & you'll spend $ & time for nothing.  :(

http://carfix.stufftoread.com/sensors/fuel-gauge-tests.html
ty jtgh

Fuzz
Logged
'97 Sidekick Sport 1" spacer lift 225/75R16 Cooper AT's. Pioneer Sound, 14" Grant Steering Wheel.Otherwise mostly stock
'96 Tracker 1.6l 16v 3spd Auto 4x4 85k - 1 1/2" OME Lift BFG 235/75 AT's on Ion Alloy 15x7's - Pioneer Sound - Custom Installed Hydraulic Drivers Seat (Sold)

Non Illegitimi Conterat
Pages: [1]   Go Up
« previous next »