Hello Guest

1995 tracker sheet metal

  • 8 Replies
  • 2280 Views

0 Members and 1 Guest are viewing this topic.

*

Offline vw505

  • 133
  • 1
1995 tracker sheet metal
« on: November 06, 2010, 11:22:26 PM »
Can i salvage the hood, grill and fenders off a 4door and put them on my two door?

*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: 1995 tracker sheet metal
« Reply #1 on: November 07, 2010, 02:26:26 PM »
No, the four door front end is different
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org

*

Offline vw505

  • 133
  • 1
Re: 1995 tracker sheet metal
« Reply #2 on: November 07, 2010, 04:10:03 PM »
I have done some rading and on line they are saying that only the bumper was differnt

*

Offline Drone637

  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: 1995 tracker sheet metal
« Reply #3 on: November 08, 2010, 11:30:10 AM »
I know they are different on the sport, but a standard 4 door will bolt straight onto the 2 door.  When we rolled Project Trouble we pulled the front body panels off of a parts 4 door and they bolted straight up.
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing

*

Offline BRD HNTR

  • 2300
  • 56
  • Gender: Male
Re: 1995 tracker sheet metal
« Reply #4 on: November 08, 2010, 12:59:00 PM »
I know they are different on the sport, but a standard 4 door will bolt straight onto the 2 door.  When we rolled Project Trouble we pulled the front body panels off of a parts 4 door and they bolted straight up.

And I used the 4 door hood to mockup my hood modifications on my 2 door.
93 Tracker,XL7 springs & 1" raised spring pads in front with YJ springs in back, home built bumpers rear & front (w/winch), 2" x 4" rock tubes,  ARB front & rear, converted Sami rear to IFS, 33x12.5x15  aluminum rims, roll cage, 2.7L w/5 speed auto.

*

Offline Skyhiranger

  • 3734
  • 122
  • I don't buy, what I can build
Re: 1995 tracker sheet metal
« Reply #5 on: November 08, 2010, 01:31:27 PM »
Can i salvage the hood, grill and fenders off a 4door and put them on my two door?

Yes.  I am sure the fenders and hood are interchangable, and I believe the grille is too.  Sports are different though.
Tracker and Sidekick parts for sale.....PM me with your wants/needs.

*

Offline vw505

  • 133
  • 1
Re: 1995 tracker sheet metal
« Reply #6 on: November 08, 2010, 05:48:05 PM »
ok them i will pick up the hood and fenders, what mods would have to be done to get the bumper to work

*

Offline Drone637

  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: 1995 tracker sheet metal
« Reply #7 on: November 10, 2010, 11:31:23 AM »
The bumper should work ,the only question is what grill it was made for.  Some grills have the center sitting lower and the bumper has a lip that goes around it.  Others have a flat bottom on the grill and no lip on the bumper.

But your bolt up mounts are the same.
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing

*

Offline vw505

  • 133
  • 1
Re: 1995 tracker sheet metal
« Reply #8 on: November 10, 2010, 05:25:31 PM »
then i will grab the bumper and mounting hardware also, the grill was sold so missed that.