Hello Guest
« previous next »
Pages: [1]   Go Down

Lift Question

  • 4 Replies
  • 1543 Views

0 Members and 1 Guest are viewing this topic.

*

Offline ffhammerhand

  • 50
  • 0
Lift Question
« on: April 16, 2012, 05:24:05 PM »
Hello all,
             I have a 86 samurai JX with a old man EMU lift on it, my question is can i or should i still do a spring over axle lift on it? if so are there any extra parts im going to need?

 If i cant do this can someone please explain to me what a spring over axle consists of, another term for it is SPOA right?
Logged
*

Offline weldboy

  • 91
  • 2
  • Gender: Male
  • I'm only here for the carnival atmosphere !!!
Re: Lift Question
« Reply #1 on: April 16, 2012, 05:37:19 PM »
OME springs are not recommended for spoa lifts.
Logged
*

Offline airdreams1

  • 90
  • 0
  • Gender: Male
Re: Lift Question
« Reply #2 on: April 18, 2012, 09:11:09 AM »
I been wondering why they dont recomend them for the  SPOA lifts.  Anyone know why?
Logged
87 Samurai  soft top
*

Offline Jonny Rash

  • 1094
  • 21
  • Gender: Male
  • Too many Samurais, too many little boys!
Re: Lift Question
« Reply #3 on: April 18, 2012, 09:39:33 AM »
I imagine it is because people do not set their SPOA bumpstops up correctly (2" of uptravel as per Brent at TT) and the OME springs compress beyond what they were intended to do.  Too much compression results in the springs bending and/or breaking.
« Last Edit: April 18, 2012, 11:11:23 AM by Jonny Rash »
Logged
35 years of Samurai ownership, and I still have my very first one. :)
*

Offline Boxcar

  • 936
  • 34
  • Gender: Male
Re: Lift Question
« Reply #4 on: April 19, 2012, 01:14:16 PM »
Soft ride springs.= spring sag on a SPOA....
 If one was to use 6" spring perches, proper bump stops , and a good high steer system etc. OME's would probably be fine.
OME won't warrentee there springs on a SPOA system for liability issues. But very few spring manufacturers will.....Boxcar
Logged
God Bless
88.5 Samurai Heavily modified.
Pages: [1]   Go Up
« previous next »