Hello Guest
« previous next »
Pages: [1]   Go Down

bolt size on dust gaurd for brakes???

  • 9 Replies
  • 1870 Views

0 Members and 1 Guest are viewing this topic.

*

codyhebdon

bolt size on dust gaurd for brakes???
« on: September 15, 2007, 06:05:20 PM »
the bolts on my dust guards (cover the brakes in the rear) have rattled loose and i dont know what size or thread pitch they are, anybody know for sure????
Logged
*

Cuthulu

Re: bolt size on dust gaurd for brakes???
« Reply #1 on: September 16, 2007, 02:42:10 PM »
I took a look in the shop manual and it does not say I am afraid.  Hopefully someone else can help you out.
Logged
*

PhnxCaller

Re: bolt size on dust gaurd for brakes???
« Reply #2 on: September 16, 2007, 09:55:01 PM »
Well, what type of zuk you got? (at least I hope its a zuk)
Logged
*

codyhebdon

Re: bolt size on dust gaurd for brakes???
« Reply #3 on: September 17, 2007, 12:56:03 PM »
1987 suzuki samurai
Logged
*

Offline Drone637

  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: bolt size on dust gaurd for brakes???
« Reply #4 on: September 17, 2007, 01:11:49 PM »
Give Hawk Suzuki a call.  They can probably either tell you are send you a couple in the mail.  :)
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

PhnxCaller

Re: bolt size on dust gaurd for brakes???
« Reply #5 on: September 17, 2007, 07:23:39 PM »
the dust covers are held on by 10 mm socket head bolt.  90% of the bolts on zuks are 10mm. Not too familiar with metric bolts but the thread gauge reads 1.00 mm with a 5mm dia. Just take a 10 mm bolt off of another part and try to thread it on if you want to be sure.
Logged
*

Offline Drone637

  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: bolt size on dust gaurd for brakes???
« Reply #6 on: September 17, 2007, 09:43:23 PM »
Huh, mine where held on by little phillips screws...  But they were on a 410 and not a Sammy.
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: bolt size on dust gaurd for brakes???
« Reply #7 on: September 18, 2007, 04:54:42 AM »
Quote from: PhnxCaller on September 17, 2007, 07:23:39 PM
the dust covers are held on by 10 mm socket head bolt.  90% of the bolts on zuks are 10mm. Not too familiar with metric bolts but the thread gauge reads 1.00 mm with a 5mm dia. Just take a 10 mm bolt off of another part and try to thread it on if you want to be sure.

If its a a 10mm head then it will be a M6x 1.0 bolt.
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
*

codyhebdon

Re: bolt size on dust gaurd for brakes???
« Reply #8 on: September 18, 2007, 10:37:54 AM »
yes these are little phillips head screws..thanks for the help, but hawk suzuki is sending me 6 new ones so i dont need to find the size anymore. thanks for the help though.

cody
Logged
*

PhnxCaller

Re: bolt size on dust gaurd for brakes???
« Reply #9 on: September 18, 2007, 09:04:00 PM »

If its a a 10mm head then it will be a M6x 1.0 bolt.
[/quote]

Yeah your right, I guess M6 is the dia.(6mm) and 1.0 the pitch
Logged
Pages: [1]   Go Up
« previous next »