Hello Guest
« previous next »
Pages: [1]   Go Down

tbi wiring

  • 2 Replies
  • 1497 Views

0 Members and 1 Guest are viewing this topic.

*

Offline Spitfire Rick

  • 123
  • 1
  • fun lovin criminal
tbi wiring
« on: January 04, 2008, 11:41:45 PM »
I have a 1.3 tbi fuel injection intake & throttle body & I have a wiring harness from a 1.6 8v tbi(tracker) that was in another rig the harness was modified so only a few power & ground wires were needed to power ecm.  the wires on the tbis  have the same plugs.  Im wondering if I can use the 1.6 harness to make the 1.3 tbi work ?.
Logged
If I have to understand don't bother explaining
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: tbi wiring
« Reply #1 on: January 07, 2008, 05:10:26 AM »
You'll have to compare the two to see how similar they are.

The Sammy EFI info can be found here:

http://www.suzukiinfo.com

The Track/Kick info is here:

http://www.btinternet.com/~j_holland/pages/schematics.html
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
*

Offline Spitfire Rick

  • 123
  • 1
  • fun lovin criminal
Re: tbi wiring
« Reply #2 on: January 07, 2008, 06:30:34 PM »
got into this swap & have decided there are slight differences in the throttle body so Im going to use 1.6 tbi on the sami tbi intake & I put the tracker in tank fuel pump inthe sami tank Ive got it almost ready to run
Logged
If I have to understand don't bother explaining
Pages: [1]   Go Up
« previous next »