G'day. Just waiting for delivery of new calmini 3 inch suspension lift for my 1990 swb vitara JX.
Anyway just needing correct advice for fitting instructions "been told it's a great kit but instructions don't give all the information for corect fitment.
Any info/photos/diagrams on what im up for would be very much appricated.

Step by step by some cool guy with a white sidekick 

http://www.izook.com/tech/tracker/3inchtrackkick/3inchtrackkick.htm

HTH,

Zig

You will notice a couple minor differences (I was replacing my calmini 2" with their 3" but it will show you what all is involved.

Zig

Looking at the pictures just below step #20, you will notice that the upper strut mount has been flipped:

***DO NOT DO THIS***

I wasted many CV's trying to get a little more drop out of the front suspension. If your front suspension is currently stock, this is a non issue, but if you have flipped the upper mount for a Calmini 2" lift or a spacer style lift, be sure to flip it back to stock (small flange up) or you will over extend and waste your CV's.

Zig

G'day
The link with instructions and everything else looks on the money what i was after.
I will getting reading/research straight away
Cheers heaps for that Zig......