Hello Guest
« previous next »
Pages: [1]   Go Down

chevy emblem removal

  • 10 Replies
  • 2772 Views

0 Members and 5 Guests are viewing this topic.

*

Offline clockwork

  • 19
  • 0
  • Gender: Male
chevy emblem removal
« on: July 17, 2008, 02:01:20 PM »
so i dont want my tracker to have the chevy bowties on it anymore and i was thinking of ways to take them off.
what would i use to take off the tracker name and bowtie thats stuck under the door trim on the front doors?
i tihnk they are just stuck on with the 3M vehicle tape.


just looking for suggestions so i dont ruin the paint underneath
Logged
~2000 Tracker~2.0L-16V~5spd manual~4-door~4WD~K&N air filter~Kenwood Excelon KDC-X491 CD Receiver~polk audio db650 speakers~US acoustics USX4095 amplifier~work in progress
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: chevy emblem removal
« Reply #1 on: July 17, 2008, 02:49:03 PM »
12 Gauge shot gun with 00 Buck shot? Just kidding, try warming them up with a heat gun or hair dryer and then SLOWLEY peeling them off. They should just be held on with double sided tape.
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Offline Uncivilized

  • 1469
  • 1
  • Gender: Male
    • Car Domain
Re: chevy emblem removal
« Reply #2 on: July 17, 2008, 03:47:12 PM »
Two way tape, do it slowly as it is really good tape. Any decals you should heat up with a hair dryer or heat gun.
To get the sticky residue off, use methyl hydrate. If it's not srong enough use WD40 - then use methyl hydrate to clean off the WD40.
Logged
*

phloop

Re: chevy emblem removal
« Reply #3 on: July 17, 2008, 05:20:11 PM »
Use the hair dryer to heat the tape up real good and then use a piece of fishing line to saw through the foam tape. Then use a 3M adhesive removal wheel thingie to remove the rest of the adhesive.
Logged
*

Offline clockwork

  • 19
  • 0
  • Gender: Male
Re: chevy emblem removal
« Reply #4 on: July 17, 2008, 05:21:02 PM »
thanks for the quick reply guys, ill go out and try it and tell you how it goes
Logged
~2000 Tracker~2.0L-16V~5spd manual~4-door~4WD~K&N air filter~Kenwood Excelon KDC-X491 CD Receiver~polk audio db650 speakers~US acoustics USX4095 amplifier~work in progress
*

Offline clockwork

  • 19
  • 0
  • Gender: Male
Re: chevy emblem removal
« Reply #5 on: July 19, 2008, 10:27:23 AM »
so i got them off no problem, just waiting for the goo-off stuff i put on to soak in so i can peel off all the left over tape.
Logged
~2000 Tracker~2.0L-16V~5spd manual~4-door~4WD~K&N air filter~Kenwood Excelon KDC-X491 CD Receiver~polk audio db650 speakers~US acoustics USX4095 amplifier~work in progress
*

Offline Drone637

  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: chevy emblem removal
« Reply #6 on: July 19, 2008, 12:15:42 PM »
What emblem are you going to put up front?
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

Offline Uncivilized

  • 1469
  • 1
  • Gender: Male
    • Car Domain
Re: chevy emblem removal
« Reply #7 on: July 19, 2008, 04:22:39 PM »
Quote from: phloop on July 17, 2008, 05:20:11 PM
Then use a 3M adhesive removal wheel thingie to remove the rest of the adhesive.
Those aren't good to use on a painted surface.
Logged
*

Offline clockwork

  • 19
  • 0
  • Gender: Male
Re: chevy emblem removal
« Reply #8 on: July 20, 2008, 09:32:48 AM »
im planning on putting the vitara grill on the front instead of the chevy bowtie, maby something else if i can get a custom fit grill made
Logged
~2000 Tracker~2.0L-16V~5spd manual~4-door~4WD~K&N air filter~Kenwood Excelon KDC-X491 CD Receiver~polk audio db650 speakers~US acoustics USX4095 amplifier~work in progress
*

Offline jzap

  • 515
  • 2
  • Gender: Male
  • How difficult can it be?
Re: chevy emblem removal
« Reply #9 on: July 21, 2008, 08:03:51 PM »
An 8 point buck at 50MPH removed the emblem from the front of my Tracker pretty effectively...   ...removed a lot of other stuff too...

This replacement grille was made from about $5 worth of 1/2 in. PVC pipe from Home Depot.



« Last Edit: July 21, 2008, 08:09:04 PM by jzap »
Logged
Jim Z.
96 Tracker
66 Apache camper
*

Offline clockwork

  • 19
  • 0
  • Gender: Male
Re: chevy emblem removal
« Reply #10 on: July 22, 2008, 06:52:07 AM »
looks pretty good jzap, ill look into doing something like that
Logged
~2000 Tracker~2.0L-16V~5spd manual~4-door~4WD~K&N air filter~Kenwood Excelon KDC-X491 CD Receiver~polk audio db650 speakers~US acoustics USX4095 amplifier~work in progress
Pages: [1]   Go Up
« previous next »