Hello Guest
« previous next »
Pages: [1]   Go Down

Stock jack placement ?

  • 6 Replies
  • 1741 Views

0 Members and 1 Guest are viewing this topic.

*

Offline RazBarlow

  • 156
  • 0
  • Gender: Male
  • It's Barney !
Stock jack placement ?
« on: January 18, 2009, 05:37:02 PM »
I know the stock scissor is about useless but where is the stock location for storage of the jack and the lugnut wrench. ?
Thanks,
Raz
Logged
*

Offline reb

  • 195
  • 0
  • Gender: Male
  • Victim of CRS--Can't Remember Anything.
Re: Stock jack placement ?
« Reply #1 on: January 18, 2009, 07:01:04 PM »
On mine the jack is under the passenger seat.  There are a couple of vertical metal pieces to place it between and tighten it down so it doesn't move around.  The wrench is under the driver's seat.  There are clips for the wrench.
Logged
*

Offline Cuthulu

  • 384
  • 0
  • Gender: Male
  • I'd kill for a Nobel Peace Prize.
Re: Stock jack placement ?
« Reply #2 on: January 18, 2009, 08:26:18 PM »
Quote from: reb on January 18, 2009, 07:01:04 PM
On mine the jack is under the passenger seat.  There are a couple of vertical metal pieces to place it between and tighten it down so it doesn't move around.  The wrench is under the driver's seat.  There are clips for the wrench.


Same thing for my 94 tracker.  I swapped out the jack with a Harbor Freight bottle jack in the same place and it des not roll around at all.  Even with wheelin.
Logged
*

Offline chevycotton77

  • 88
  • 0
  • Gender: Male
  • lets go whheellin
Re: Stock jack placement ?
« Reply #3 on: January 18, 2009, 10:01:09 PM »
yeah same here those bottle jacks are alot better.
Logged
96 2D Tracker stock, 30" BFG MTs, 6inch calmini combo soon :)
*

Offline RazBarlow

  • 156
  • 0
  • Gender: Male
  • It's Barney !
Re: Stock jack placement ?
« Reply #4 on: January 19, 2009, 05:45:24 AM »
I don't seem to have any clips under my driver's seat for the wrench and only have one bracket under the passenger's seat . If anyone gets a chance, can they snap a couple of quick pics to show the wrench and the jack mounted ? I have a small bottle jack that I will put in the tracker instead of the OEm.
Thanks for all the input,
Raz
Logged
*

Offline Zukipilot

  • 7160
  • 25
  • Gender: Male
  • stretch the limits of reality!!!
Re: Stock jack placement ?
« Reply #5 on: January 19, 2009, 06:56:26 AM »
On a stock vehicle the stock jack will work fine. The 'bracket for the lug wrench was plastic clips that held it to the side of the jack mounting bracket.

Zig
Logged
Zukipilot
'92 Liberty Overland Sidekick
*

Offline Jeremiah

  • 1880
  • 1
  • Gender: Male
  • Viva La ZUKIWORLD!
Re: Stock jack placement ?
« Reply #6 on: January 19, 2009, 12:49:06 PM »
In a tracker, the lug nut wrench is under driver's seat - secured by little plastic clips, and jack is under passenger seat. The scissor jack has always worked just fine for me on my 29" tires. I actually PREFER it, because it's more secure under there (partially expand the jack when it's in the "holder" and it will hold itself securely in there), and I've seen what happens to heavy items in a roll-over. Imagine that heavy bottle jack freely flying about in the cabin.
Logged
'96 4 door kick: 29" Pep-Boys M/T, 1.5" OME
'83 SJ410: 31" Toyo M/T, SPOA, 1.3L
'08 Yamaha FZ6
Pages: [1]   Go Up
« previous next »