Hello Guest
« previous next »
Pages: [1]   Go Down

1" body lift question

  • 7 Replies
  • 1414 Views

0 Members and 1 Guest are viewing this topic.

*

Offline 2K1USGV

  • 218
  • 0
  • I Love ZUKIWORLD!
1" body lift question
« on: November 13, 2008, 04:04:10 PM »
Quick question for nay who may know. Would i need the steering rack extension if I was doing a 1" body lift?
Logged
*

Offline jeff1997

  • 1228
  • 27
  • Gender: Male
  • Suzuki: A Jeep thing only cheaper!!!!
Re: 1" body lift question
« Reply #1 on: November 13, 2008, 04:09:34 PM »
Probably not.
Logged
1997 4dr. Sidekick Sport 1.8L DOHC
2" coil spacers- I make and sell 1.5" and 2" on e-bay.  Look under seller: hoepkers
3" Masterkit1 body lift
Custom strut spacers
31/11.50/16 Super Swamper LTB's w/1.5" wheel spacers Steel bumpers Custom cold air intake 2" exhaust w/cherry bomb 98 Expedition, 2" lift, 35's, Magnaflow exhaust - BIG BLUE
*

Offline bzzr2

  • 1011
  • 3
Re: 1" body lift question
« Reply #2 on: November 14, 2008, 07:14:45 AM »
only one way to find out!  let us know.
Logged
03-ZR2, 2dr, 31x10.5 SSR's & stuff...--sold :-(
03 xl7, jeff's 2inch spacer lift, 225/75/16's; sold
09 taco reg cab short box 4x4
*

Offline Jeff@TireBalls

  • 559
  • 0
  • Gender: Male
Re: 1" body lift question
« Reply #3 on: February 02, 2009, 05:22:01 PM »
Who sells a 1" body lift?
Logged
2000 Grand Vitara Limited, 2" lift, 225/75-16 BFG KO's, 5.12 gears, Safari snorkel, roof rack.
1987 Samurai LWB, VW 1.9 Turbo Diesel.
*

Offline nprecon

  • 2318
  • 52
  • Gender: Male
  • ONWARD... through the fog!
Re: 1" body lift question
« Reply #4 on: February 03, 2009, 02:46:17 PM »
I think guys have been adding an additional stock body spacer biscuit to gain the additional inch..
Logged
'02 Chezuki Tracker with a 2 Liter and 5spd.  It works for me!!!
*

Offline Jeff@TireBalls

  • 559
  • 0
  • Gender: Male
Re: 1" body lift question
« Reply #5 on: February 04, 2009, 06:12:39 AM »
Quote from: nprecon on February 03, 2009, 02:46:17 PM
I think guys have been adding an additional stock body spacer biscuit to gain the additional inch..

I searched but couldn't find any info on this. Do you know of a link?
Logged
2000 Grand Vitara Limited, 2" lift, 225/75-16 BFG KO's, 5.12 gears, Safari snorkel, roof rack.
1987 Samurai LWB, VW 1.9 Turbo Diesel.
*

Offline rascott

  • 669
  • 15
  • Gender: Male
  • tread lightly monkeywrench a little
Re: 1" body lift question
« Reply #6 on: February 04, 2009, 03:14:37 PM »
i did this on my '89 kick. yours may be different, but look and see.
i took the lower dougnut off and replaced w/thinner material, and put more on top.
i used pieces i cut out of some old conveyor belt- looks like tire material.
i got 1 1/8" body lift.
gas fill hose still fit, had to lower front brake hose fitting(where it goes thru wheel well), and remount a brake line block on the passenger side.
i'll bet yours is similar.
oh yea- there were two other places on each side that had rubber mounts. i stacked the same amount of material on the frame at those locations before i let the body back down- no fasteners- and they are still there after 2 seasons.
Logged
'89 kick w/little motor, still got pieces of jeff's pucks, stan's sticks into 4.24:1 tcase, 31x10.5x15's, rear lockrite, kick power steering, some radios(kj6esv), bmw seat, other changes just because. done on the cheap.
suzi the psychic gets me fishing.
*

Offline sir lance

  • 342
  • 4
  • I love my XL-7
Re: 1" body lift question
« Reply #7 on: February 04, 2009, 11:38:25 PM »
thats what i did on my first gv as well, it got me a 1 3/4 inch lift, i just took the bottom rubber off and put it up top. no other mods needed.........other than the bumper brackets of course......

-lance
Logged
02' XL-7 1 Ton axles, dual t-cases 37's etc......
Trucks are built not bought*********
Pages: [1]   Go Up
« previous next »