Hello Guest

95 geo tracker body lift

  • 4 Replies
  • 2921 Views

0 Members and 1 Guest are viewing this topic.

*

Offline cmays03

  • 99
  • 0
  • Gender: Male
95 geo tracker body lift
« on: May 18, 2009, 04:47:14 PM »
well I'm going to make a 3" body lift for my tracker. I would like to know what you all have ran into when doing a body lift on a tracker any problems that you ran into or suggestions to make it easier to do. thanks
95 geo tracker sas with dana 30,35 axles 3.55 gears, 33 tsl's, 3 and 4 link suspension. stock motor trans, tcase has 4.24:1 reduction kit.

*

Offline TopHeavy96

  • 488
  • 4
  • Gender: Male
Re: 95 geo tracker body lift
« Reply #1 on: May 18, 2009, 07:38:34 PM »
There's a good write up for a 3" bl here,  should have some good answers.

http://www.zuwharrie.com/content/view/11/27/1/3/

The write up covers most of what you'll run into,  you'll have to extend a few things, and relocate a few things.

Hope this helps!
96' Tracker 4-door, 16v, auto, open front, limited slip rear, Jeff1997's 2" lift with diff spacer, 95' mustang shocks, Calmini axle truss, BFG 30x9.5 mud-terrains on 15x8 "D"-windows, trimmed and banged fenders and bumpers, radio shack CB, Tom Tom GPS, 100w KC lights
http://www.facebook.com/video/video.php?v=1097549855954

*

Offline cmays03

  • 99
  • 0
  • Gender: Male
Re: 95 geo tracker body lift
« Reply #2 on: May 19, 2009, 03:22:40 AM »
thanks that helps a lot.
95 geo tracker sas with dana 30,35 axles 3.55 gears, 33 tsl's, 3 and 4 link suspension. stock motor trans, tcase has 4.24:1 reduction kit.

*

Offline TopHeavy96

  • 488
  • 4
  • Gender: Male
Re: 95 geo tracker body lift
« Reply #3 on: May 19, 2009, 04:44:54 AM »
No problem, welcome to the site!
96' Tracker 4-door, 16v, auto, open front, limited slip rear, Jeff1997's 2" lift with diff spacer, 95' mustang shocks, Calmini axle truss, BFG 30x9.5 mud-terrains on 15x8 "D"-windows, trimmed and banged fenders and bumpers, radio shack CB, Tom Tom GPS, 100w KC lights
http://www.facebook.com/video/video.php?v=1097549855954

*

Offline cmays03

  • 99
  • 0
  • Gender: Male
Re: 95 geo tracker body lift
« Reply #4 on: May 19, 2009, 11:17:09 AM »
thanks I just finished making all the pieces to do the body lift. Next I have to disconnect what needs to be then ready to start the install.
95 geo tracker sas with dana 30,35 axles 3.55 gears, 33 tsl's, 3 and 4 link suspension. stock motor trans, tcase has 4.24:1 reduction kit.