does anyone know of a snorkel kit for my 2000 tracker.

There are a couple of suppliers - OGZ in Brazil and FTS out of Taiwan.

Be warned - an ebay search may pull up several listings for snorkels advertised as fitting - ask to see the template before purchase - if it's a rectangular template with a rectangular hole for a turn signal - then it does not fit the vehicle you have without modification.

thank you

hi all, my name is Lena)) I am a new member here )) thanks for your post , nice to meet you all here, in this web site

My snorkel came out of Singapore and it had the European / Asian template. I had to do a lot of measuring to make sure that I drilled the hole in the right place.  It was still off by about 1/8" (3mm), but I was able to adjust the hole. It was all covered by the snorkel.

The biggest issue is making sure you pick the right engine style.  The Asian models had a V6 when they were not available here. The other issue is if it is a J series or G series engine. The intakes are on opposite sides.

Ridjobradi - what vehicle are you referring to?

The original poster is asking about a 2000 Tracker, which is going to be an SQ series vehicle, SQ series vehicles were available in the US market with the G16 & J20 four cylinder engines or the H25 V6, non-US markets had the same three gasoline engines along with two different diesels, depending on the year of manufacture - the intake is on the right side of the vehicle, regardless of which engine is fitted.

It was meant as a general statement when looking for snorkels from other markets.  I also didn't know that they moved the air box to the right side for the G16.