Hello Guest
« previous next »
Pages: [1]   Go Down

noisey front diff

  • 4 Replies
  • 1732 Views

0 Members and 2 Guests are viewing this topic.

*

Offline rickstar

  • 2
  • 0
  • ZUKIWORLD Online!
noisey front diff
« on: March 26, 2018, 01:18:54 PM »
I have a 2001 v6 auto grand vitara  there is a grinding noise in my front diff. it comes and goes intermittently  it appears  in 2 or 4 wheel drive and also if i roll in neutral
I have disconnected the vacuum hose and still there. it is on the right hand side of car  more than the left.
any ideas 
Logged
*

Offline beagle..t

  • 1239
  • 16
  • Gender: Male
Re: noisey front diff
« Reply #1 on: March 26, 2018, 07:48:06 PM »
broken CV or chipped ring and pinion
Logged
new rig aka "the mule" 2002 tracker
V6 swap auto  ,2 dr ,2" BL,2" jeffs kit 512 gears warn hubs and 30/9.5/15 BFG AT
*

Online fordem

  • 4321
  • 168
  • Gender: Male
Re: noisey front diff
« Reply #2 on: March 27, 2018, 03:39:48 AM »
The ring & pinion should be stationary in 2WD, so that rules that out ...
Logged
'98 SQ420 Grand Vitara
'05 JB420 Grand Vitara
'16 APK416 Vitara
'21 A6G415 Jimny
*

Offline BRD HNTR

  • 2300
  • 56
  • Gender: Male
Re: noisey front diff
« Reply #3 on: March 27, 2018, 07:08:53 AM »
I would jack up the front and roll each side individually, with TC in 2wd.  I would suspect either CV's or wheel bearings.
Logged
93 Tracker,XL7 springs & 1" raised spring pads in front with YJ springs in back, home built bumpers rear & front (w/winch), 2" x 4" rock tubes,  ARB front & rear, converted Sami rear to IFS, 33x12.5x15  aluminum rims, roll cage, 2.7L w/5 speed auto.
*

Offline rickstar

  • 2
  • 0
  • ZUKIWORLD Online!
Re: noisey front diff
« Reply #4 on: March 28, 2018, 12:41:27 PM »
Thanks guys i have replaced wheel bearing and still there i will check cv
Logged
Pages: [1]   Go Up
« previous next »