Hello Guest

rear bump stop ???

  • 10 Replies
  • 2450 Views

0 Members and 1 Guest are viewing this topic.

*

Offline purevil71

  • 261
  • 0
  • Gender: Male
  • Someday when I grow up, I wanna be hardcore too!!
rear bump stop ???
« on: May 12, 2005, 08:39:01 AM »
I need some info, pix, whatever on different rear bump stop options. With my new larger tires, I need a rear bump stop to keep them out of the fenders, and with my goofy leaf set up, I can't mount them in the stock location.
Does anyone have any pix of them mounted to say the u-bold plates or something like this? ANY ideas would be great, thanks in advance
88.5 Samurai
Balls Deep 4x4 & Off-Road
I-Zook Staff

*

Offline SnoFalls

  • 1358
  • 3
  • Gender: Male
Re: rear bump stop ???
« Reply #1 on: May 12, 2005, 08:46:35 AM »
you said ANY ideas ...

cut the fenders :)
I don't suffer from insanity, I enjoy it.

Buy-it, Build-it, Beat-it, Part-it

*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: rear bump stop ???
« Reply #2 on: May 12, 2005, 09:31:33 AM »
Ditch the bumpers, redrill the springs and move the axles further apart. My 410 has them mounted on the axle tube above the spring perch, I'm guessing you're SPOA? I don't see any reason why you can't mount them on the U bolt plates
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org

*

Offline Chief

  • 678
  • 0
  • Gender: Male
  • Whaddya lookin at??
Re: rear bump stop ???
« Reply #3 on: May 12, 2005, 10:29:04 AM »
Quote
you said ANY ideas ...

cut the fenders :)


x2!!

03 Tacoma, BBP sliders, TRD L/S, Modded intake,  Da Tow Bitch

94 Tracker. Cancer mod :p Otherwise stock

*

Offline purevil71

  • 261
  • 0
  • Gender: Male
  • Someday when I grow up, I wanna be hardcore too!!
Re: rear bump stop ???
« Reply #4 on: May 12, 2005, 04:58:08 PM »
don't really wanna trim the fenders any more...not that theres a lot of metal left there anyway....lol
It's looking like the u-bolt plats are going to be the ticket.
88.5 Samurai
Balls Deep 4x4 & Off-Road
I-Zook Staff

*

Offline trackermad

  • 150
  • 0
  • Gender: Male
Re: rear bump stop ???
« Reply #5 on: May 13, 2005, 12:56:43 AM »
On my Scout I used rubber bump stops off from and old snowmobile ski.  They looked identical to the original stock ones they are about 2 inches long with a bolt adhered to one end.  Just look on some old sleds with leaf springs on them.
"First of all: what is work? Work is of two kinds: first, altering the position of matter at or near the earth's surface relatively to other such matter; second, telling other people to do so."  ~Bertrand Russell

*

Offline Uncivilized

  • 1469
  • 1
  • Gender: Male
    • Car Domain
Re: rear bump stop ???
« Reply #6 on: May 13, 2005, 01:13:29 AM »
More Lift...?

*

Offline purevil71

  • 261
  • 0
  • Gender: Male
  • Someday when I grow up, I wanna be hardcore too!!
Re: rear bump stop ???
« Reply #7 on: May 13, 2005, 06:53:39 AM »
Quote
More Lift...?

Actually, I wanna keep the tires out of the fenders, but also, a bumpstop will force the opposite goofy leaf to open more thus giving me a little more flex in the rear ;D
88.5 Samurai
Balls Deep 4x4 & Off-Road
I-Zook Staff

*

Offline Cwkick

  • 888
  • 0
  • Gender: Male
Re: rear bump stop ???
« Reply #8 on: May 13, 2005, 09:38:36 AM »
Just an idea.  Right in front of your goofy leaves, there is a flat plate.  You could put a bump stop there.  That is how Jeep YJ's are.  The bump stop is more towards the front of the spring, not in the center.

Cwkick

*

Offline Natebert

  • 1098
  • 0
  • Gender: Male
Re: rear bump stop ???
« Reply #9 on: May 13, 2005, 09:52:15 AM »
I put the bumpstops on top of pedestals on top of our u-bolt plates for the longest time.  Seemed to work great for us.

~Nate
« Last Edit: May 13, 2005, 09:53:18 AM by natebert »

*

Offline purevil71

  • 261
  • 0
  • Gender: Male
  • Someday when I grow up, I wanna be hardcore too!!
Re: rear bump stop ???
« Reply #10 on: May 13, 2005, 05:27:19 PM »
thanks for all the ideas!!!
88.5 Samurai
Balls Deep 4x4 & Off-Road
I-Zook Staff