Rear axle rotation on a trakick

ppltrak

654
0
Gender:
zukspeed staff

Rear axle rotation on a trakick

« on: September 29, 2005, 01:26:30 PM »

I'm thinking about doing this mod. Has anyone had any driveline vibration after this mod? I now have pretty bad vibration with the Calmini 3" kit and I think that it will help. Any feedback would be great.

Kevin

Logged

94 purple/green splash tracker w/ calmini 3' heavly modified lift 32 11.5 r15 bfg m/t's & custom air induction and header w/ 2"exh. no cat lockrite rear 2" B/L and a heavy right foot and now 583s steel up front and locked.
2002 GV 2.5l 4.5 ZN lift locked on 31's

SnoFalls

1358
3
Gender:

Re: Rear axle rotation on a trakick

« Reply #1 on: September 29, 2005, 02:41:50 PM »

have you tried adjusting the joints at the rear after the 'mini lift? ... I've seen others need to do that adjustment to get the pinion/tcase angles right.

Logged

I don't suffer from insanity, I enjoy it.

Buy-it, Build-it, Beat-it, Part-it

Mikerpm4x4

2875
12
Gender:
Redline... all the time!

Re: Rear axle rotation on a trakick

« Reply #2 on: September 29, 2005, 05:43:06 PM »

The over rotation will reduce the angle that the u joints operate at. This is a good thing.

Mike

Logged

If your not living life to the fullest then your not living at all.

You wont really know if your wrong till your upsidedown

ppltrak

654
0
Gender:
zukspeed staff

Re: Rear axle rotation on a trakick

« Reply #3 on: October 03, 2005, 08:23:42 AM »

Thanks

Logged

94 purple/green splash tracker w/ calmini 3' heavly modified lift 32 11.5 r15 bfg m/t's & custom air induction and header w/ 2"exh. no cat lockrite rear 2" B/L and a heavy right foot and now 583s steel up front and locked.
2002 GV 2.5l 4.5 ZN lift locked on 31's