Hello Guest

looking for distributor pickup near chicago

  • 1 Replies
  • 798 Views

0 Members and 1 Guest are viewing this topic.

looking for distributor pickup near chicago
« on: July 25, 2012, 07:05:44 PM »
I'm working with a 92 Samurai 1.3 and I'm almost positive I have a bad distributor pickup. If I put 12 volts and ground to the pickup I don't get anything back out of the signal wire. The cheapest I could find a pickup is 150 bucks. I thought that was outragous. I bet I could get one for a jeep for a fraction of that price. Anyways, I was wondering if anyone was around Chicago. I would like to test a known good one before I dump 150 on a new one. I can't even find one in the junk yards. If anyone has a lead on where I could pick one up cheap that would be awesome. By the way my condition is a crank no start with no spark from the coil. No signal from the ECM and no signal from the ignighter. I'm thinking that I don't have any signal out of those two because I have no distributor signal going into the ECM.  Thanks.

*

Offline tuxblacray

  • 930
  • 20
  • Gender: Male
  • Building a Bigger Better Brute Samurai.... B-}
    • Tuxblacray Photos
Re: looking for distributor pickup near chicago
« Reply #1 on: July 28, 2012, 03:49:22 AM »

Click the links in my signature... It is for a friend of mine (Mike Parmalee). He owns and operates an all Samurai Salvage yard. He will take care of you easily and painlessly... Tell him Tux sent ya and he will take good care of you....  ;)
I know the voices aren't real.... but they have some pretty kewl ideas!!! Tux.....  ;-)
I get my Sammi parts here, and you can too... http://www.mikodaindustries.com/http://stores.ebay.com/sticksnstones4x4samuraiparts