I run the Grand Vit springs up front and a set of 1" spacers in the rear.  This gives the Tracker a nice level look.  You will get a little over 2" of lift in the front, enough that you will want to put a strut spacer up front.  Otherwise you will end up topping out your struts on large bumps giving it a rougher ride then needed.  I run a 1 3/4" strut spacer that was modified from some spring spacers we had left around.  
The rear springs cannot be used as they have a smaller diameter then the stock springs and you would need to modify the upper mount to make them fit.
In my opinion the springs are better then the spring spacer, a much softer ride overall.  But they are stiffer then the stock springs and OME's, BRDHNTR has a set of cut down OME XL7 springs in his front end and has a plusher ride.  With the stock struts it wasn't as noticeable but with the addition of the Bilstein front struts the front end is a touch stiffer then I would like.