Hello Guest
« previous next »
Pages: [1]   Go Down

jeffs spacer help?

  • 5 Replies
  • 1736 Views

0 Members and 1 Guest are viewing this topic.

*

Offline Perram

  • 9
  • 0
jeffs spacer help?
« on: October 26, 2011, 04:10:34 AM »
Hey i installed the Jeffs spacers and under full flex there is a clicking noise

the noise sounds like its coming from the back diff like the spines on the tail shaft and diff are jumping apart
i havnt added a diff spacer from the tail shaft. Would this fix it?

any advise would help

Cheers Pez
Logged
*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
Re: jeffs spacer help?
« Reply #1 on: October 26, 2011, 12:37:52 PM »
Quote from: Perram on October 26, 2011, 04:10:34 AM
Hey i installed the Jeffs spacers and under full flex there is a clicking noise

the noise sounds like its coming from the back diff like the spines on the tail shaft and diff are jumping apart
i havnt added a diff spacer from the tail shaft. Would this fix it?

any advise would help

Cheers Pez

I'd think the U-joint would be a more likely culprit.
Logged
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com
*

Offline jeff1997

  • 1228
  • 27
  • Gender: Male
  • Suzuki: A Jeep thing only cheaper!!!!
Re: jeffs spacer help?
« Reply #2 on: October 26, 2011, 03:02:06 PM »
X2
Logged
1997 4dr. Sidekick Sport 1.8L DOHC
2" coil spacers- I make and sell 1.5" and 2" on e-bay.  Look under seller: hoepkers
3" Masterkit1 body lift
Custom strut spacers
31/11.50/16 Super Swamper LTB's w/1.5" wheel spacers Steel bumpers Custom cold air intake 2" exhaust w/cherry bomb 98 Expedition, 2" lift, 35's, Magnaflow exhaust - BIG BLUE
*

Offline Perram

  • 9
  • 0
Re: jeffs spacer help?
« Reply #3 on: October 27, 2011, 08:19:12 AM »
i am going to have a good look next week up on some stands but as of now im too busy with work...

cheers for the advise!

Pez
Logged
*

Offline tuxblacray

  • 930
  • 20
  • Gender: Male
  • Building a Bigger Better Brute Samurai.... B-}
    • Tuxblacray Photos
Re: jeffs spacer help?
« Reply #4 on: October 27, 2011, 01:18:34 PM »

I agree with the other fellows diagnosis... But, have you called Jeff and asked him? When I put mine on Jeff was extremely helpfull! He has sold these for some time now and if there is any problems with his kits I am betting he has heard it all....

Logged
I know the voices aren't real.... but they have some pretty kewl ideas!!! Tux.....  ;-)
I get my Sammi parts here, and you can too... http://www.mikodaindustries.com/http://stores.ebay.com/sticksnstones4x4samuraiparts
*

Offline jeff1997

  • 1228
  • 27
  • Gender: Male
  • Suzuki: A Jeep thing only cheaper!!!!
Re: jeffs spacer help?
« Reply #5 on: October 29, 2011, 08:03:49 AM »
You could add a diff spacer but I do not think it will help. It sounds like the U joints to me. Is it a 2 door or 4 door? The driveshafts are shorter on a 2 door thus more angle when lifted.
Logged
1997 4dr. Sidekick Sport 1.8L DOHC
2" coil spacers- I make and sell 1.5" and 2" on e-bay.  Look under seller: hoepkers
3" Masterkit1 body lift
Custom strut spacers
31/11.50/16 Super Swamper LTB's w/1.5" wheel spacers Steel bumpers Custom cold air intake 2" exhaust w/cherry bomb 98 Expedition, 2" lift, 35's, Magnaflow exhaust - BIG BLUE
Pages: [1]   Go Up
« previous next »