Hello Guest
« previous next »
Pages: [1]   Go Down

Carb Question for 1.6 8v swap

  • 9 Replies
  • 5700 Views

0 Members and 2 Guests are viewing this topic.

*

Offline SNJSamurai

  • 386
  • 0
  • Gender: Male
  • Always have fun in life never know when it can end
Carb Question for 1.6 8v swap
« on: February 15, 2012, 06:56:24 PM »
Im in the process in finishing my 1.6 swap in my samurai.

I used the 1.3 intake manifold and I am wondering if a Weber Carb would be a waist of money and I should just keep the stock 1.3 carb?


Thanks



Logged
Bob
88' Samurai - 5" Lift, 3" DIY Body Lift, 31" Baja Claws, Rattle can flat green, Smittybilt Winch, Custom front bumper, 1.6 swap in progress
*

Offline rbparker

  • 120
  • 1
  • Gender: Male
Re: Carb Question for 1.6 8v swap
« Reply #1 on: February 15, 2012, 08:19:29 PM »
I use the weber carb with the same set up. I bought a jet pac and tuned it. It gets into the power band by 1900 rpm and keeps building until 4500 rpm. I do have a torque cam and it runs much smother than the 1.3.
Logged
*

Offline Boxcar

  • 936
  • 34
  • Gender: Male
Re: Carb Question for 1.6 8v swap
« Reply #2 on: February 17, 2012, 08:05:29 AM »
There is allways this one.
http://www.ebay.com/itm/New-75-76-Toyota-Corolla-1-6-1600-2BBL-Carburetor-/270916269342?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ACorolla&vxp=mtr&hash=item3f13de351e
 Advantages:
Nearly a direct fit,( no adapters)
Works well off angles, ( Unlike the Weber)
Stock air box,
Jetted for the 1600,
Ultra simple to tune ,
At $95 , less than half the cost of the Weber,
Great low end gains ,
Better economy than the Weber
Noticeable top end gains.
E, choke.....
....Boxcar...
Logged
God Bless
88.5 Samurai Heavily modified.
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: Carb Question for 1.6 8v swap
« Reply #3 on: February 18, 2012, 02:43:56 PM »
The Weber will give a lot more power, the stock 1.3 carb is quite restrictive on the 1.3 and more so on the 1.6.
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
*

Offline SNJSamurai

  • 386
  • 0
  • Gender: Male
  • Always have fun in life never know when it can end
Re: Carb Question for 1.6 8v swap
« Reply #4 on: March 15, 2012, 01:15:57 AM »
Sorry about the really late replies guys. School, Work, Etc.

I read on ACKs about the toyota carb but it was a little confusing. Is there a better explanation?


Thanks
Logged
Bob
88' Samurai - 5" Lift, 3" DIY Body Lift, 31" Baja Claws, Rattle can flat green, Smittybilt Winch, Custom front bumper, 1.6 swap in progress
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: Carb Question for 1.6 8v swap
« Reply #5 on: March 20, 2012, 04:25:58 AM »
Why didn't you use the fuel injection that came with the engine?
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Offline Boxcar

  • 936
  • 34
  • Gender: Male
Re: Carb Question for 1.6 8v swap
« Reply #6 on: March 20, 2012, 09:22:11 AM »
What do you need to know about the Toyota swap?
Ask and you will receive...Boxcar...
Logged
God Bless
88.5 Samurai Heavily modified.
*

Offline GO_OUTSIDE!

  • 182
  • 0
  • Gender: Male
  • Sammy Jack
Re: Carb Question for 1.6 8v swap
« Reply #7 on: August 17, 2012, 05:21:59 AM »
Boxcar, I sent you a PM.
I am very much interested in putting a corolla carb on a 1.6L 8V in my Samurai. Actually I would like to put it on my 1.3L until I can find a 1.6L and then do a full swap. Is that a possibility?
Logged
Whats a guy gotta do to earn some respect around here?
*

Offline GO_OUTSIDE!

  • 182
  • 0
  • Gender: Male
  • Sammy Jack
Re: Carb Question for 1.6 8v swap
« Reply #8 on: August 17, 2012, 05:32:54 AM »
I found these on ebay
Will it work or does it have to be a 1976 77 carb? They are both for the 2TC engine.
Logged
Whats a guy gotta do to earn some respect around here?
*

Offline GO_OUTSIDE!

  • 182
  • 0
  • Gender: Male
  • Sammy Jack
Re: Carb Question for 1.6 8v swap
« Reply #9 on: August 19, 2012, 02:29:06 PM »
I found a '76 2tc carb on ebay. Its on its way, any help would be appreciated.
Logged
Whats a guy gotta do to earn some respect around here?
Pages: [1]   Go Up
« previous next »