ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: nuts4hotwheels on February 13, 2008, 10:03:23 AM

Title: restoring plastic bumper
Post by: nuts4hotwheels on February 13, 2008, 10:03:23 AM
 my bumpers and trim is faded. Is there a way and/or product to restore it?
Title: Re: restoring plastic bumper
Post by: big_kountry21 on February 13, 2008, 10:37:04 AM
try baby oil.....that did it for my bronc. its better than armor all. great for dashes too doesn't crack em over time.
Title: Re: restoring plastic bumper
Post by: justzukies on February 13, 2008, 11:02:35 AM
for black trim BACK TO BLACK by mothers works great, its an oil/wax at like product. as far as the plastic bumper covers go you can remove them and there is a metal bumper underneath.
Title: Re: restoring plastic bumper
Post by: crikeymike on February 13, 2008, 02:35:05 PM
There's black plastic spray paint you can buy from the auto parts store, and it worked great on my wife's tracker.  Lasted about 3 years before it kinda chipped off a bit, but it looked great for a long time.

Duplicolor was the brand i think.
Title: Re: restoring plastic bumper
Post by: Jeremiah on February 13, 2008, 04:18:15 PM
I've not found a product that does well "restoring" plastic to it's original luster, but then - I've not tried everything under the sun.

However, I've had great luck with Krylon Fusion (spray paint) on plastics. Just make sure you watch your prep.
Title: Re: restoring plastic bumper
Post by: ebewley on February 13, 2008, 04:24:23 PM
WD-40.... Seriously.

-Eric
Title: Re: restoring plastic bumper
Post by: Rhinoman on February 14, 2008, 04:53:44 AM
WD-40.... Seriously.

-Eric

x2
Title: Re: restoring plastic bumper
Post by: nuts4hotwheels on February 14, 2008, 09:49:14 AM
 I will try the WD-40 this weekend and post before and after pics
Title: Re: restoring plastic bumper
Post by: trackinstile on February 14, 2008, 01:38:24 PM
Do you soak it on the bumbper and then rub it in or soak it on the rag and wipe on?  WD stands for water displacement.  And it was the 40th formula they came up with.  I am going to have to try it.  Dave..    ps,. please post before and after pics if you can, my trim is grey and needs help. 
Title: Re: restoring plastic bumper
Post by: Cuthulu on February 15, 2008, 06:37:38 AM
WD stands for water displacement.  And it was the 40th formula they came up with.  I am going to have to try it.  Dave..    ps,. please post before and after pics if you can, my trim is grey and needs help. 

I had always wondered, and I second the pic request.

Eric, how long does that hold up for usually?

Thanks
Title: Re: restoring plastic bumper
Post by: erik the red on February 15, 2008, 06:00:40 PM
I've got the plastic stock "bumper" sitting in my garage you can have.
Title: Re: restoring plastic bumper
Post by: trackinstile on February 15, 2008, 06:34:11 PM


I had always wondered, and I second the pic request.

Eric, how long does that hold up for usually?

Thanks
[/quote]

I found something on the web with some research about WD 40, it was an interesting story.  Unfortunatly I have the memory of a sloth, gotta look it up again.  Dave
Title: Re: restoring plastic bumper
Post by: Cuthulu on February 16, 2008, 10:36:33 PM
http://en.wikipedia.org/wiki/WD-40
Title: Re: restoring plastic bumper
Post by: trackinstile on February 17, 2008, 06:08:14 PM
THATS THE ARTICLE!!!!!! :laugh:
Title: Re: restoring plastic bumper
Post by: nuts4hotwheels on February 18, 2008, 04:49:23 AM
I guess my thread got hijacked :) , but here is more about WD-40:
_________________________________________________________

In 1953, a fledgling company called Rocket Chemical Company and its staff of three set out to create a line of rust-prevention solvents and degreasers for use in the aerospace industry, in a small lab in San Diego, California.

It took them 40 attempts to get the water displacing formula worked out. But they must have been really good, because the original secret formula for WD-40�which stands for Water Displacement perfected on the 40th try�is still in use today.

Convair, an aerospace contractor, first used WD-40 to protect the outer skin of the Atlas Missile from rust and corrosion. The product actually worked so well that several employees snuck some WD-40 cans out of the plant to use at home.

A few years following WD-40's first industrial use, Rocket Chemical Company founder Norm Larsen experimented with putting WD-40 into aerosol cans, reasoning that consumers might find a use for the product at home as some of the employees had. The product made its first appearance on store shelves in San Diego in 1958.

In 1960 the company nearly doubled in size, growing to seven people, who sold an average of 45 cases per day from the trunk of their cars to hardware and sporting goods stores in the San Diego area.

In 1961 the first full truckload order for WD-40 was filled when employees came in on a Saturday to produce additional concentrate to meet the disaster needs of the victims of Hurricane Carla along the U.S. Gulf coast. WD-40 was used to recondition flood and rain damaged vehicles and equipment.

 

 
 In 1969 the company was renamed after its only product, WD-40.

WD-40 Company, Inc., went public in 1973 and was listed Over-The-Counter. The stock price increased by 61% on the first day of listing.

Since that time, WD-40 has grown by leaps and bounds, and is now virtually a household name, used in numerous consumer and industrial markets such as automotive, manufacturing, sporting goods, aviation, hardware and home improvement, construction, and farming.

In 1983, WD-40 Company sales reached $50.2 million. Many companies attempted to introduce imitation products, going so far as to copy the distinctive blue, yellow and red colors of the WD-40 can.

In 1993, WD-40 Company celebrated its 40th anniversary by breaking the $100 million sales mark. That year the company was also listed among the Top Ten Most Profitable companies on the NASDAQ exchange. Not bad for a company with only one product!

WD-40 was found to be in 4 out of 5 American households (it seems everyone has a can or two) and was used by 81 percent of professionals at work. Sales had grown to more than one million cans each week.

The most interesting piece of WD-40's history is the uses for the product, now numbering in the thousands. The uses include everything from silencing squeaky hinges and removing road tar from automobiles to protecting tools from rust and removing adhesive labels. But they get a lot crazier than that.
 
Title: Re: restoring plastic bumper
Post by: big_kountry21 on February 18, 2008, 08:09:36 AM
well wd-40 is good.... i just used baby oil on mine and it turned out great.