Hello Guest
« previous next »
Pages: [1]   Go Down

Idle-up

  • 3 Replies
  • 1374 Views

0 Members and 2 Guests are viewing this topic.

*

Offline Skeeter

  • 23
  • 0
  • Gender: Male
Idle-up
« on: October 03, 2006, 03:22:45 PM »
I have a 1985 Sierra/Samurai. When you turn the headlights on, the engine idle goes up. Is there a way to switch on this "idle-up" without turning the headlights on? I want to make the idle go up to around 1500rpm when I turn on my 12v compressor, but I don't want it at 1500rpm everytime I turn on the headlights.

Hope that makes sense
Skeeter
Logged
*

Offline Skeeter

  • 23
  • 0
  • Gender: Male
Re: Idle-up
« Reply #1 on: October 08, 2006, 04:02:57 PM »
Can I just cut one of the wires that runs to the "idle up" solenoid & put a switch "inline"?

Cheers
Logged
*

Offline RGERBER

  • 81
  • 0
  • Gender: Male
  • I Love ZUKIWORLD!
Re: Idle-up
« Reply #2 on: October 08, 2006, 07:24:06 PM »

I would think,

The idle goes up because of the load the headlights puts on the alternator, if you hook up a compressor, the idle should go up automatically when you turn it on, and it draws amps from the alternator.
Logged
94 SUZUKI SAMURAI / 1.6 8 VALVE TRACKER MOTOR.
*

Offline Skeeter

  • 23
  • 0
  • Gender: Male
Re: Idle-up
« Reply #3 on: October 08, 2006, 07:54:05 PM »
The problem is, if I adjust it to say 1500rpm, turn on compressor, it should work fine. BUT,I don't want it at 1500rpm every time I turn on the headlamps. I only want it that high when the compressor is on.
Logged
Pages: [1]   Go Up
« previous next »