does anyone knwo if they make thes for track kicks?

You guys are funny just need to ask.. Yes we ship globaly I have shipped tube clips to guam and cages to Hawaii.. Our cages are all 100% prenotched and fitted before they ever leave the shop. shipping cost between $60-$100 depending on location we have shipped to dam near every state..
as far as tube clips for the Kicks we should be getting a kick in mid Jan for mockup of new product. I was hoping to get it earlyier this year but with time constraints and some pretty big jobs that came into the shop we just didnt have the time... As far as designs we will build anything you can draw with in reason.. or at least describe

847-544-1823

I was planning to send you guys an email, just hadn't gotten there yet.  I noticed on the website you say you can have just a front portion of the cage based on the existing roll bar, I don't think I really want to trust that bar so would it be possible to build something that has a new main hoop but only goes to the front?  I am planning to cut the back area off mine due to rust, I would kind of like to run some diagonals from the main hoop to the rear frame though.

Yes we can make a new rear B-hoop if so desired. Just FYI the stock B-hoop is 2" .090 wall tube and generaly a pretty stout pc. once you add on to it. Most circle trac cars are made from .090 wall 1.5" just for a comparison.
Basic front  A-hoop dash bar and 4 spreaders would be $295 the new b-hoop would be additional. Weather you buy from us or some one else do your homework. Find out exactly what is involved with other cages, do you have to trim notch or fit any of the competitions bars. Ours you do not do anything but weld. All cages are built in a stock straight zuk. If you would like any testimonails just ask and i can hook you up with the contacts or ask on the pirate4x4.com. zuwharrie.com or offroad.com and they will let you know what we have done and can do. we dont specialize in off the shelf replicas. Allthough we do have a few standards, most of our stuff is one of a kind hence the price, as stated before we will build anything within reason and have the capability to do so.
We have a 2300 sq ft facility which houses all our CNC machinery and tubing benders, soon to be added hopefully this yr will be a new waterjet and torch table.. anyway feel free to call and discuss the designs you want to look at doing. Even if you dont purchace from us I will gladly talk with you about what to look for in  cage..
happy holidays
-Scott

I find the price to be quiet reasonable, and the quality looks number 1 to me.  I think I am going to have to do my body mods to the rear tub before I decide on anything, or if I am going to cut the tub off at all.  Just somethings to ponder for awhile.  In my area here in Vermont lots of people are into racing as there is a circle track close by, so I am going to look around here to see what can be bought and prices too.

  I have a DAVESORT and it says its approved for everything , whatever that meansto me the front hoop would have been fine because the stock roll bar is bigger . but just the front hoop  doesnt give you approval for everything , but you can still use your stock tops , you know the 3 piece. its way cheaper that the full cage and easyer to install but still requires welding . I got mine from rocky road , I believe the full sport cgae was 75 for shipping 500 for the cage ..