Hello Guest

Missing vacuum line on canister on right side of motor, wheres it go?

  • 2 Replies
  • 1434 Views

0 Members and 1 Guest are viewing this topic.

*

Offline Festiva

  • 92
  • 0
  • I Love ZUKIWORLD!
Hi guys, my 94 tracker has the canister on the left side of the motor, it has just a single nipple on the top of it (unlike some that have 2 nipples.) but no vaccum line hooked up, where does this go?

          Thanks!

                 Jason

*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: Missing vacuum line on canister on right side of motor, wheres it go?
« Reply #1 on: October 05, 2005, 04:42:18 PM »
Strange, should have 2, if you are sure
there is no purge nipple, the one should
go to the Gas Tank
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.

*

Offline ack

  • 1659
  • 34
  • Gender: Male
  • Professional askhole
    • Ack's FAQ
Re: Missing vacuum line on canister on right side of motor, wheres it go?
« Reply #2 on: October 05, 2005, 05:03:41 PM »
Hi guys, my 94 tracker has the canister on the left side of the motor, it has just a single nipple on the top of it (unlike some that have 2 nipples.) but no vaccum line hooked up, where does this go?

          Thanks!

                 Jason

Yep, there  should be two.  One has a hose that goes back to the gas tank, the other goes to a vacuum valve mounted on a bracket above and inboard of the thermostat housing on the front of the intake manifold (or thereabouts).  At least that is the case on my 93 and 96 16-valves.

Ack

'88 Samurai, '88.5 Samurai TT, '11 Ford Transit Connect XLT
Ack's FAQ  http://www.acksfaq.com