Hello Guest
« previous next »
Pages: 1 ... 5 6 [7]   Go Down

GV likely goes under the knife the first weekend in June

  • 93 Replies
  • 13544 Views

0 Members and 1 Guest are viewing this topic.

*

Offline JDMCRX

  • 1110
  • 0
  • Gender: Male
  • 02 Grand Vitra Pimp lol
Re: GV likely goes under the knife the first weekend in June
« Reply #90 on: October 24, 2006, 08:44:02 PM »
Hey man shot me a email to jpbauto|removethispart|@yahoo.ca

The front camber works. Im gonna look for some pics exactly what we did.

The 4cyl lift 2" in the front and the gv 1.75" due to the engine weights. the rear is the problem as im runnin a  2.5" spacer in the rear and its pulling the brake line. Im trying to get a shop to make me lines but its taking longer then i wanted.

Im gonna contact earls again and see what we can fab up. I did a 3" spacer for the rear and its sits nice but u can not drive it with the stock brake line and the pan hard bar is being pulled a bit.

Ill play with it this winter and so forth

If anyone has questions email me jpbauto|removethispart|@yahoo.ca or call me I will help.

josh
Logged
01 GRAND VITARA

JBAUTO LONGTUBE HEADERS AND 2.5" JBAUTO EXHAUST

New project H27 in the GV goal 200 Wheel Horse Power  JPB 1.75"front 2" rear Grand Vitra lifts  www.jbauto.ca[/url]
*

Offline bzzr2

  • 1011
  • 3
Re: GV likely goes under the knife the first weekend in June
« Reply #91 on: October 29, 2006, 03:57:45 PM »
here's pics of mine with the lower hole ovaled, front spacer is 1inch from JDMCRX.  works great. 
« Last Edit: October 29, 2006, 04:01:41 PM by bzzr2 »
Logged
03-ZR2, 2dr, 31x10.5 SSR's & stuff...--sold :-(
03 xl7, jeff's 2inch spacer lift, 225/75/16's; sold
09 taco reg cab short box 4x4
*

Offline IanL

  • 466
  • 5
  • Gender: Male
  • You know the answer - DIY :-)
Re: GV likely goes under the knife the first weekend in June
« Reply #92 on: October 30, 2006, 12:16:19 AM »
Nice pics.  The trick I saw is, once you are happy with the position, tack weld a washer to the strut to fix the new position.  Should prevent slipping under impact load.
Logged
'98 GV V6, '96 X-90 with RRO 2.5" lift and 195/80 R15, '93 Cappuccino.
*

Offline JDMCRX

  • 1110
  • 0
  • Gender: Male
  • 02 Grand Vitra Pimp lol
Re: GV likely goes under the knife the first weekend in June
« Reply #93 on: October 30, 2006, 07:46:48 PM »
Yeah that would work too :)
Logged
01 GRAND VITARA

JBAUTO LONGTUBE HEADERS AND 2.5" JBAUTO EXHAUST

New project H27 in the GV goal 200 Wheel Horse Power  JPB 1.75"front 2" rear Grand Vitra lifts  www.jbauto.ca[/url]
Pages: 1 ... 5 6 [7]   Go Up
« previous next »