Hello Guest
« previous next »
Pages: [1]   Go Down

Wiring - help

  • 5 Replies
  • 1494 Views

0 Members and 1 Guest are viewing this topic.

*

Offline vitara-dave

  • 11
  • 0
  • I love YaBB 1G - SP1!
Wiring - help
« on: November 13, 2006, 08:47:30 AM »
I had to put in a new gasket in my engine (1600 16V) and know i've refitted everything. The problem is that i don't what to do with 1 plug of the wiring from the injection. It is a white plug at the end of the wiring loom, ends at the same place as the throttle position sensor. Can you help me? (If needed, i will try to show a picture.)
Logged
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: Wiring - help
« Reply #1 on: November 13, 2006, 10:41:22 AM »
That would be for the injector, there should be a matching plug round the back of the throttle body.
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
*

Offline vitara-dave

  • 11
  • 0
  • I love YaBB 1G - SP1!
Re: Wiring - help
« Reply #2 on: November 14, 2006, 12:19:57 PM »
Ive multipoint injection and all 4 injectors are connected. Ore is there more?



« Last Edit: November 14, 2006, 12:21:44 PM by vitara-dave »
Logged
*

Offline vitara-dave

  • 11
  • 0
  • I love YaBB 1G - SP1!
Re: Wiring - help
« Reply #3 on: November 16, 2006, 03:25:17 AM »
Can nobody help me?  :(
(The Vitara has to work this weekend...)
Logged
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: Wiring - help
« Reply #4 on: November 16, 2006, 10:25:41 PM »
mine has one there like that also, I think it is for the california e.g.r. valve.
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
*

Offline Uncivilized

  • 1469
  • 1
  • Gender: Male
    • Car Domain
Re: Wiring - help
« Reply #5 on: November 17, 2006, 05:30:46 AM »
I checked my 95 canadian model, I traced the wires to something mounted to the back on the engine, looks similar to the EGR valve in a vertical position. It's very close to the heater core hoses entering the firewall, right above them.
Logged
Pages: [1]   Go Up
« previous next »