Hello Guest
« previous next »
Pages: [1]   Go Down

Samurai Pulls Under Heavy Breaking

  • 7 Replies
  • 1824 Views

0 Members and 1 Guest are viewing this topic.

*

Offline W.O.T

  • 38
  • 0
Samurai Pulls Under Heavy Breaking
« on: January 09, 2007, 09:43:04 PM »
im pretty sure its a braking problem but im not really sure what to look for.   the samurai drives perfectly straight with no hands on the wheel so i dont think its alignment.  but under moderate braking it pulls to the right pretty hard.  any ideas?  could it just need a new set of pads on the front end?
Logged
*

Offline igofshn

  • 13
  • 0
Re: Samurai Pulls Under Heavy Breaking
« Reply #1 on: January 09, 2007, 10:10:51 PM »
Can you say, brake job!!! :) :) :)
Logged
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: Samurai Pulls Under Heavy Breaking
« Reply #2 on: January 09, 2007, 10:36:31 PM »
my 88 sammie has the stock brake setup on it and the way the master cylinder works is it applies the brakes in an X pattern not like american rigs sepparating the fronts and the rears in the master, hope this helps, and yes it is normal on a sammie needing a brake job!
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
*

Offline W.O.T

  • 38
  • 0
Re: Samurai Pulls Under Heavy Breaking
« Reply #3 on: January 09, 2007, 10:50:17 PM »
thanks for the info.  im sure it could use new brakes ill start with that
Logged
*

Offline RShrimp

  • 28
  • 0
  • Gender: Male
Re: Samurai Pulls Under Heavy Breaking
« Reply #4 on: January 10, 2007, 09:13:07 AM »
You have a caliper hanging up
Logged
88.5 Samurai with spring over and 31,s
Americas Oil problem is simple. We just can't seem to check our oil.
The oil is in Texas and Alaska .... The DIP STICKS are in Washington!
*

Offline JamesG

  • 2
  • 0
Re: Samurai Pulls Under Heavy Breaking
« Reply #5 on: January 10, 2007, 11:23:30 AM »
Stop running into things and maybe it won't break so much.  ;D
Logged
*

Offline Gary_Hill

  • 288
  • 0
  • Gender: Male
Re: Samurai Pulls Under Heavy Breaking
« Reply #6 on: January 10, 2007, 10:26:38 PM »
Bad oil seal on one side will make it pull to the side that has no oil on the break pad. First thing to check...
Logged
*

Offline W.O.T

  • 38
  • 0
Re: Samurai Pulls Under Heavy Breaking
« Reply #7 on: January 11, 2007, 07:15:00 PM »
i pulled it apart and the caliper and disc were covered in grease.  do you know which seal it is?  i pulled it apart but didnt find anything that looked to be bad.  thanks
Logged
Pages: [1]   Go Up
« previous next »