Hello Guest
« previous next »
Pages: [1]   Go Down

oil pressure/ boost gauge

  • 2 Replies
  • 1235 Views

0 Members and 1 Guest are viewing this topic.

*

Offline sidekick101

  • 128
  • 0
  • Gender: Male
  • best site on the net
oil pressure/ boost gauge
« on: January 19, 2007, 06:40:26 PM »
where is the hole on the enign to putan oil temp gauge and is there any need for a boost gauge on a stocker 1.6l 8V? if so where do you put that one 
Logged
1993 sidekick JX, 2 dr, soft top, automatic,
*

Offline 1badzuk

  • 96
  • 0
  • Gender: Male
Re: oil pressure/ boost gauge
« Reply #1 on: January 19, 2007, 11:10:19 PM »
theres no need for a boost gauge unless its turbo
Logged
87 sammy 33's sometimes on 35s hole lot of extras 4 link arb lockers built tcase and tranny 1.6 dual weber carbs racing seats snorkle and so on.........ALOT MORE..........
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: oil pressure/ boost gauge
« Reply #2 on: January 20, 2007, 06:28:14 AM »
To fit an oil pressure gauge you normally remove the stock oil pressure switch and fit the oil pressure sensor instead. You can fit a T piece to allow both to be used. You may need an adapter, the stock switch is an M10x1 thread.
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
Pages: [1]   Go Up
« previous next »