Hello Guest
« previous next »
Pages: [1]   Go Down

Body lift

  • 1 Replies
  • 1035 Views

0 Members and 1 Guest are viewing this topic.

*

Offline museboy07

  • 641
  • 0
  • Gender: Male
Body lift
« on: April 10, 2007, 11:22:55 AM »
Hey guys,
Im on my brothers user name since i dont have one...anyway...i want to put a 2in bodylift on my 92 track.  The thing is i can see that the body mount bolts are rusted sorta bad.  Anyone do a bodylift when the bolts were rusted like that?  How long did it take you?  did you have to cut anything?
Logged
1994 Tracker, 2in Ironman springs w/ 1in spacers on top, soon to have custom diff drop brackets, 31x10.5-15 All Tarrains, Pro Comp long travel shocks, KYB performance struts, strut mount flip w/2in extensions, 3in rear a-arm spacer, ...DD
*

Offline Jimiweld

  • 234
  • 0
  • Gender: Male
    • www.fullfusion.ca
Re: Body lift
« Reply #1 on: April 10, 2007, 11:32:23 AM »
The only ones that gave me troubles were the front ones underneath the headlight area. Once the front bumper is off you can torch a small hole to gain access to the "nut" area to allow heating to get the bolt out or to add penetrating fluid. This area will be covered up again so the hole will not be noticeable.
Jim
Logged
1990 Tracker - 3.5" body Lift, 1.5 coil spacers, 31" TRXUS tires, homemade front bumper, Automatic Tansmission, 5.12 diff gears. Rear is Locked
Pages: [1]   Go Up
« previous next »