ok...i currently have 2" coil spacers in front and rear, resulting to a little over 2.5" of lift in the front and a strait 2" lift in the rear...i put on the crown vicky shocks when i did the 2" spacer install....now im debating weather to put in 4 door coils or a 3" spacer in the rear....with that extra 1" of lift in the rear, am i going to need even longer shocks??

Yes you will need longer shocks the ones you have now will prolly get you by until you get some but you take a chance of over extending them the ones that you need to look into are a Monroe 32305 they fit the front of a early 90s f150 they are about 31 inches long fully extended. which is about the closest to what you need.

Yes you will need longer shocks the ones you have now will prolly get you by until you get some but you take a chance of over extending them the ones that you need to look into are a Monroe 32305 they fit the front of a early 90s f150 they are about 31 inches long fully extended. which is about the closest to what you need.

I am also using these shocks, only thing I dont like about them is they are alittle stiff....

anything else needed to be done to put these on??

anything else needed to be done to put these on??

Nope mine are in the stock position.

sweet...thanks man.....what do you have for a lift??

you haven't mentioned it yet but you WILL need the rear a-arm spacer

sweet...thanks man.....what do you have for a lift??

I have a 2 door tracker with four door boondox 3 inch lift springs in it. 

right on....that thing looks bad|removethispart|@$$....i see you didnt space your diff down either....i have 2" spacers all the way around resulting in 2.5" in the front, and my cvs are fine....good to know that i could put her up another half inch before any issues...

and by the way museboy07....im already planning on the a arm spacer....know of any good links that show exact specs on these??

Couple years ago someone posted up their autocad plans for a spacer.  Might do a search for them.


I've got the Calmini 3" lift on my Tracker and I'm running rear shocks off of a 2wd '98 F150.  The mountings are perfect for the Tracker and they're both slightly longer extended and slightly shorter compressed than the Calmini 3" shocks.

Heres a link to one someone built.  Depending on how thick you want it you may want to change the thickness but all the hole measurements are correct.

http://babelfish.altavista.com/babelfish/trurl_pagecontent?lp=pt_en&trurl=http%3a%2f%2fwww.cabrito.suzukioffroad.com.br%2fUpper%2520wishbone.htm

thats a pretty sweet link there...perfect blueprint....dont even have to take it apart....but a quick Q?...how thick should it be for a 3" lift??