Hello Guest
« previous next »
Pages: [1]   Go Down

Need More Lift????

  • 6 Replies
  • 1871 Views

0 Members and 1 Guest are viewing this topic.

*

Offline techie

  • 80
  • 0
  • Gender: Male
  • On the mountain anytime
Need More Lift????
« on: September 24, 2005, 09:06:39 PM »
Have an 87 Sami with a 5" SPOA and Aftermarket shackles the give another half an inch or so of lift but I need another inch or two to get rid of the tire rub in the wheel wells with the 31x12.50's. I don't want a body lift. To get another 2" of lift what would be my best options to maintain a good ride and the handling??? Cost??

What are the thoughts on a Shackle Reverse kit for another 2" of lift.
« Last Edit: September 24, 2005, 09:10:41 PM by techie »
Logged
*

Offline Digger

  • 1991
  • 1
  • Gender: Male
  • 1996 Suzuki X-90 4X4
Re: Need More Lift????
« Reply #1 on: September 24, 2005, 09:22:41 PM »
You're running 5-1/2" of lift and have rubbing with 31's? :o

Where are you rubbing at? Perhaps a little trimming would cure it...

A friend of mine is running 31-9.50x15 Swampers on 15x8" rims with 3-3/4" of backspacing on his 93 sammy with only a 2" body lift and some fender trimming(more like rust repair than intentional trimming). He doesn't rub at all and isn't running the swaybar, either...
Logged
Had a cool sig pic till I changed the text... sigh...
90 Tracker: "Silver", 2" BL, 1-1/2" Coil Spacers, Strut mount flip, Calmini Header, Winch, 31" Swamper radials, Sold.
98 Suzuki X-90: Calmini 2" Sus, 1-1/4" whl spcrs, 2" Exhaust, Cobra Safari Bar, Neon, Sold.
96 Suzuki X-90: Mostly stock daily driver(for now)
*

Offline techie

  • 80
  • 0
  • Gender: Male
  • On the mountain anytime
Re: Need More Lift????
« Reply #2 on: September 24, 2005, 09:50:30 PM »
Quote from: Digger on September 24, 2005, 09:22:41 PM
You're running 5-1/2" of lift and have rubbing with 31's? :o

Where are you rubbing at? Perhaps a little trimming would cure it...

I am running 31x12.50's. No rubbing in the rear but on the front wheel wells I get quite a bit when turning and articulating. It's enough to start cuttin' into the tire tread. Did a little massaging with the old 5lb sledge hammer but I am still getting more than I like. I'd start cutting if it was rusty but its not, so I am not quite prepared to start that.
Logged
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: Need More Lift????
« Reply #3 on: September 25, 2005, 12:18:17 PM »
I would look at moving the axle forwards to get the clearance, maybe using rear springs up front (RUF), that will give you a better ride too.
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
*

Offline bashzuk

  • 784
  • 1
  • Gender: Male
  • Been zuked lately!!!
    • BashZuk's web page
Re: Need More Lift????
« Reply #4 on: September 26, 2005, 07:23:48 AM »
Hmm where are you rubbing at I'm running 32's with about the same amount of lift only place I rub at full stuff is the back of the front wheel wells I'm pretty sure that I'm going to go with RUF to fix it.
how about some pics to get a better idea.
you could also get some lift springs from Trail Tough.
Logged
Mean Green Wheeling Machine
88 Samurai 1" Shackles SPOA with 32" Tires
It's not a Jeep thing, it's not a Suzuki thing, or a Chevy,Ford thing.
It's a wheeling thing now get out and do it!
*

Offline ebewley

  • 6566
  • 66
  • Gender: Male
  • ZUKIWORLD Online, Editor
    • ZUKIWORLD online
Re: Need More Lift????
« Reply #5 on: September 26, 2005, 09:14:27 AM »
Two words:

Bump Stops!

:)

-Eric
Logged
Eric L. Bewley                               
Editor, ZUKIWORLD Online                   

Suzuki 4x4 Owners Association - Please Join  The ZUKIWORLD ORDER Today!
About ZUKIWORLD Online: We are an enthusiast web site dedicated to the promotion of the Suzuki Automobile as the best and most capable vehicle on the planet. We offer product reviews, Tech tips, DIY, Travel and Adventure, Forum, Technical information, Life Style, and so much more!
*

Offline bashzuk

  • 784
  • 1
  • Gender: Male
  • Been zuked lately!!!
    • BashZuk's web page
Re: Need More Lift????
« Reply #6 on: September 26, 2005, 06:29:24 PM »
bump stops smumt stops.
we don't need no stinking bump stops.
just kidding that is another way to cure the problem.

I'm going to move the axle forward only because it gains me more wheel base and articulation.
Logged
Mean Green Wheeling Machine
88 Samurai 1" Shackles SPOA with 32" Tires
It's not a Jeep thing, it's not a Suzuki thing, or a Chevy,Ford thing.
It's a wheeling thing now get out and do it!
Pages: [1]   Go Up
« previous next »