Hello Guest
« previous next »
Pages: [1]   Go Down

Tracker gears in a on a sammy carrier problem

  • 3 Replies
  • 1584 Views

0 Members and 1 Guest are viewing this topic.

*

Offline brlj

  • 512
  • 1
  • Gender: Male
  • 6" Lift w/ 33x12.50 TSL Radials, Exoskeleton
    • Bills 93 Tracker
Tracker gears in a on a sammy carrier problem
« on: October 02, 2005, 07:08:02 AM »
Im putting Trackick 5.12's on a sammy carrier. I assembled the carrier with the aluminum diff can that holds the spider gear pins in. When I put the carrier into the 3rd member I got the backlash to about .010 . When I spin the assembly the aluminum diffcan hits the outer edge of the pinion gear. Has anyone had problems with the diffcan hitting the pinion gear like that?

Bill
Logged
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: Tracker gears in a on a sammy carrier problem
« Reply #1 on: October 02, 2005, 11:56:49 AM »
You could be missing a trick gear shim that moves the ring gear over would be my guess.
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
*

Offline mbmarkyb

  • 461
  • 0
  • Gender: Male
    • UK Vitara
Re: Tracker gears in a on a sammy carrier problem
« Reply #2 on: October 03, 2005, 12:10:33 PM »
i have just done my vit into sammy 3rd
i took the carrier out of the kick one. the pinion out of the kick one put the pinion in the sammy 3rd and the kick carrier in the sammy 3rd , all fine? out using it yesterday

did you leave the sammy pinion in or the crown wheel,  ? sammy pinion is a big mother?
Logged
Markyb (UK)
UK Vitara JLX SE
*

Offline brlj

  • 512
  • 1
  • Gender: Male
  • 6" Lift w/ 33x12.50 TSL Radials, Exoskeleton
    • Bills 93 Tracker
Re: Tracker gears in a on a sammy carrier problem
« Reply #3 on: October 05, 2005, 05:32:03 AM »
I didnt leave the sammy pinion in but what is the crown wheel? Also I didnt know I needed a gear shim where do you get one?

Thanks
Logged
Pages: [1]   Go Up
« previous next »