Hello Guest
« previous next »
Pages: [1]   Go Down

Question about TC reduction gears in Trackicks

  • 1 Replies
  • 1119 Views

0 Members and 1 Guest are viewing this topic.

*

Offline Quaddawg

  • 1622
  • 1
  • Gender: Male
  • Flex and Ground Clearance is HIGHLY overrated!!
    • My Ebay Store
Question about TC reduction gears in Trackicks
« on: March 07, 2006, 12:44:56 PM »
I have a question about trail riding with crawler gears in the TC of a Tracker

31" tires,  5.62 gears   5 speed.   What gear do you guys cruise in? on say, fire roads, or sections where you want to run, say 15-20 mph?  Right now, with my 5.12's and 31's... high range 1st is too high to comfortably cruise in...  and after the 5.62's and  crawler gears,  low range 1st will be way too slow, as will probably 2nd...

My question is, say going from one place to another off road... what gear do you use in low range?  I know I will figure it out in about 10 seconds when I get it done.. but I was just wondering what you Crawler gear guys do...  pure curiosity and lack of patience... LOL...
Logged
1996 Tracker Daily Driver, "The Flea"

Clicke HERE for Specs and Pics[/url]
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: Question about TC reduction gears in Trackicks
« Reply #1 on: March 07, 2006, 01:15:23 PM »
Just get the gears from trail tough and don't look back  ;D you will be amazed at what your rig will do with them  8) I have 6.4's and there about perfect.
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
Pages: [1]   Go Up
« previous next »